Yamaha EX5 Owner's Manual download pdf (Page 277)

■ Word Clock

Sets whether the EX is used as the Word Clock

master or as a slave. “Word Clock” means

synchronization of the audio signal that passes

through digital devices. It is necessary to use Word

Clock when one or more digital audio devices are

connected for playback or recording.

When the EX is used as a master, the Word clock is

set at a sampling rate of 44.1kHz. When the EX is

used as a slave, the Word Clock automatically

changes to the clock received at WORD CLOCK IN

(WORD CLOCK IN: separately sold EXDGO1 jack).

❏ Settings: internal (EX = master), external (EX = slave)

This “Word Clock” parameter is not displayed or

selected unless you install an optional EXDGO1 Digital

Output Board.

For the EX to output a digital signal, it is necessary to

install the separately sold EXDGO1 (Digital Output

Board).

When receiving word clock from an external audio

device, you will need to connect the EXDGO1 (Word

Clock In [BNC] jack) and the external audio device. In

this case, use the BNC connector/coaxial cable with the

impedance characteristics, 75Ω.

[F7]: MSG (Greeting Message)

Sets the message that will be momentarily displayed in

the screen when the power is turned on. The message

can be up to a maximum of 20 characters.

For more information or how to input characters, see page

79.

277

Utility Mode

Utility/E/qx 5/21/98 11:55 AM Page 277

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 303 304

No comments

Yamaha EX5 Owner's Manual Page 277