Yamaha NS-P400 Owner's Manual download pdf (Page 8)

• Connect the speakers to the speaker output terminals of

your amplifier with the provided speaker cords.

• Connect the speakers making sure not to reverse the

polarity (+, –). Connect the (+) terminals on both the

amplifier and the speakers using one side of the cord.

Connect the (–) terminals on both components using the

other side of the cord. If one speaker is connected with

reversed polarity, the sound will be unnatural and lack bass.

• For the main and effect speakers only

, connect one

speaker to the left (marked L) terminals of your amplifier,

and another speaker to the right (marked R) terminals.

• The subwoofer can be connected to either the speaker

output terminals or the line output (pin jack) terminals of the

amplifier. Choose one of the ways shown in this section

which is suitable for your audio system. Also, refer to the

owner’s manual for each component to be connected to this

unit.

CONNECTIONS

OUTPUT

TO SPEAKERS

INPUT1

FROM AMPLIFIER

INPUT2

ON OFF

AUTO

POWER

OUTPUT

TO SPEAKERS

INPUT1

FROM AMPLIFIER

REAR REARCENTER

CAUTION

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

MAIN

SPEAKERS

REAR

SINGLE

Subwoofer

Effect speaker

Center speaker

Effect speaker

Right

Main speakers

Right Left

Left

Amplifier

To AC outlet

Note

This diagram shows an example of connecting speakers to an amplifier which has two sets of main speaker output terminals. If you

select this connecting way, make the amplifier output signals from both sets of main speaker output terminals.

This system can also be connected to the amplifier in other ways depending on the type of amplifier. Refer to pages 10 to 11 for

details.

Never plug in the subwoofer and other audio/video components until all connections are completed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments

Yamaha NS-P400 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Subwoofers Yamaha NS-P400