Yamaha QX5 Manual download pdf (Page 28)

The function of the Cassette Mode is to let you save Patterns and Songs onto a normal

cassette tape. This allows you to clear (erase) Patterns and Songs stored in the RX17’s

internal memory, and create new Patterns and Songs. You can then create an expanding

cassette tape library of Patterns and Songs. At any time, you can load the Patterns and

Songs from the tape into the RX17. The verify function allows you to check that the data

has been correctly saved.

Saving is not the same as normal recording–

the Patterns and Songs are saved in the

form of complex digital data. Ideally, a computer data recorder should be used.

NOTE: You can also save Patterns and Songs to floppy disk, using the Bulk Dump

function. See operation 5.7 TRANSMIT BULK.

4.0.1 CONNECTIONS

The RX17 should be connected to a cassette recorder using the supplied cassette cable.

Connect the red cable to the cassette recorder’s microphone input jack, the white cable

to the cassette recorder’s headphone output jack and the 8-pin DIN plug to the RX17’s

CASSETTE IN/OUT terminal.

4.0.2 ENTERING THE CASSETTE MODE

All cassette operations are preceded by pressing CAS to enter the Cassette Mode. The

LCD will show

The Function numbers (1 thru 3) allow you to select the Cassette Mode’s three Functions.

This is done by using the or

keys to move the cursor to the appropriate Function

number. The LCD will then display the selected Function. You can also move the cursor

by pressing JOB plus the Numeric Key corresponding to the Function number. If you

press only JOB, the cursor will move to Function 1.

To exit the Cassette Mode, press any other Mode key.

Cassette Mode Functions are numbered 4.1 thru 4.3 in this chapter.

4.0.3 ABORT CASSETTE OPERATION

At anytime during a cassette operation, you can abort the operation by pressing STOP/

CONTINUE. The LCD will show a “BREAK!” message. For example, if you are loading

data into the RX17, but you suddenly realize that you want to preserve the data contained

in the RX17’s internal memory, you can abort the load operation. You can then clear the

“BREAK!” display by pressing any Mode Key.

4.1 SAVE

This Function allows you to save the data of all 100 Patterns and

Songs stored in the

RX17’s internal memory.

1. Press CAS. The flashing cursor will indicate Function 1.

Make sure that a blank cassette is loaded into the cassette recorder, and the recording

level is high. Start the cassette recorder running in the record mode. Press +1 YES.

It takes about one minute to save an average set of Pattern and Song data. After saving,

the LCD will show

then return to the Cassette Function Select display.

3. Stop the cassette recorder. You should now execute operation 4.3 (Verify) to be sure

that the data has been correctly saved.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 46 47

Comments to this Manuals

No comments

Yamaha QX5 Manual Page 28

Comments to this Manuals

Related products and manuals for Sequencer Yamaha QX5