Yamaha QX5 Manual download pdf (Page 10)

1.3.2 SINGLE lNSTRUMENT CHANGE

1.4.1 CLICK LEVEL

1. Press INST CHANGE

1. Press LEVEL

2. Press the key corresponding to the instrument you wish to change.

2. Use the –1 NO key to reduce the Click level, or the +1 YES key to increase the

Click level. RANGE: 0 (OFF)–31.

3. Press LEVEL again to return to the mode the RX17 was in before the Click Level

operation.

1.4.2 INSTRUMENT LEVEL

3. Press the same instrument key again to change the instrument.

1. Press LEVEL

4. Press INST CHANGE again to return to the mode the RX17 was in before the

Instrument Change operation.

1.4 LEVEL

The

MASTER VOLUME

slider controls the overall level of the RX17. There are, however,

three other level operations possible.

l CLICK LEVEL lets you change the level of the click signal that you will hear as a

timing guide when writing a Pattern in Real Time.

l INSTRUMENT LEVEL lets you change the level of individual instruments.

l ACCENT LEVEL lets you change the Accent level of individual instruments (refer to

section 1.5 for an explanation of Accents).

NOTE 1: These operations can be carried out at any time except during a cassette

operation or MIDI Bulk (operations 5.6 and 5.7).

NOTE 2: The –1 NO and +1 YES keys are used for level change, as well as many

other operations. Pressing and releasing these keys causes a change of one unit.

Holding them down causes a rapid and continuous change.

2. Press the instrument key corresponding to the instrument whose level you wish to

change.

Use the –1 NO or +1 YES key to change the Instrument level. RANGE: 0 (OFF)– 31.

4. Press LEVEL again to return to the mode the RX17 was in before the Instrument

Level operation.

1.4.3 ACCENT LEVEL

1. Press LEVEL

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

No comments

Yamaha QX5 Manual Page 10