Yamaha AR230 Specifications download pdf (Page 281)

8-9

HULL AND DECK x

8

HULL

DECK

SERVICE POINTS

Throttle/ Shift Cable Installation

Install Cables into Remote Control

1. Remove:

• Four screws holding the remote control

unit cover.

• Four screws holding the remote control

unit to the deck.

• Lift the remote control unit.

• Disassemble remote control unit.

2. Set:

• Remote Control levers in Neutral posi-

tion.

3. Install:

• Cables joints 1 onto each cable so

there is 11mm (0.44 in.) of thread

engagement on the cable ends - see

Detail A.

4. Tighten:

• Cable Joint lock nuts 2.

2.9 Nm (0.3 kgf-m, 2.2 ft-lb)

5. Install:

• Reverse cable 3 onto Shift Arm pin

and into the housing clamp so that the

groove in the outer cable fits into the

ridge in the housing clamp 4.

• Insert Throttle cable 5 in same man-

ner.

• Secure Cable joints to the Shift and

Throttle arm pins with circlip 6.

6. Assemble:

• Backplate 7 and screws 8.

• Remote Control assembly 9 with

screws and bolt/ nut .

3.9 Nm (0.4 kgf-m, 2.9 ft-lb)

7. Install:

• Remote Control Assembly in boat deck.

4.4 Nm (0.45 kgf-m, 3.3 ft-lb)

8. Install:

• Remote Control cover.

1.9 Nm (0.2 kgf-m, 1.4 ft-lb)

10

DETAIL A

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 357 358

Comments to this Manuals

No comments