Yamaha VINO 125 Service Manual Page 86

  • Download
  • Add to my manuals
  • Print
  • Page
    / 294
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 85
3-38
CHK
ADJ
EAS00148
CHECKING AND ADJUSTING THE STEER-
ING HEAD
1. Stand the scooter on a level surface.
w
Securely support the scooter so that there
is no danger of it falling over.
NOTE:
Place the scooter on a suitable stand so that
the front wheel is elevated.
2. Check:
8steering head
Grasp the bottom of the front fork legs
and gently rock the front fork.
Binding/looseness J Adjust the steering
head.
3. Remove:
8head light cover
8front turn signal light bracket
8leg shield 1
Refer to “COVER AND PANEL”.
4. Adjust:
8steering head
*****************************************************
a. Remove the upper ring nut 1, the lock
washer 2, the center ring nut 3 and the
rubber washer 4.
b. Loosen the lower ring nut 5 and then
tighten it to specification with the steering
nut wrench 6.
NOTE:
Set the torque wrench at a right angle to the
steering nut wrench.
Steering nut wrench
90890-01403
YU-33975
Lower ring nut (initial tightening
torque)
28 Nm (2.8 m • kg, 20.3 ft • lb)
CHECKING AND ADJUSTING THE STEERING HEAD
T
R
.
.
3
4
1
2
5
6
Page view 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 293 294

Comments to this Manuals

No comments