– 24 –
5. Install the spark plug.
TIP
If a torque wrench is not available when installing a
spark plug, a good estimate of the correct torque is
1/4-1/2 turn past finger tight. However, the spark plug
should be tightened to the specified torque as soon as
possible.
6. Install the spark plug cap.
7. Install the front cover and tighten the screws.
Spark plug torque:
20 Nm (2.0 m·kgf, 14 ft·lbf)
7XF-28199-12_b 2011.3.21 16:06 Page 24
Comments to this Manuals