– 23 –
Spark plug inspection
The spark plug is an important engine component,
which should be checked periodically.
1. Remove the screws, and then pull outward on the
areas of front cover shown.
1 Screws
2 Front cover
2. Remove the spark plug cap and then remove the
spark plug.
3. Check for discoloration and remove the carbon.
The porcelain insulator around the center elec-
trode of spark plug should be a medium-to-light
tan color.
4. Check the spark plug type and gap.
a Gap
TIP
The spark plug gap should be measured with a wire
thickness gauge and, if necessary, adjusted to specifi-
cation.
Standard spark plug:
BPR4ES (NGK)
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
1
2
788-7XFa
7XF-28199-12_b 2011.3.21 16:06 Page 23
Comments to this Manuals