Yamaha EF2800i - Inverter Generator Owner's Manual download pdf (Page 40)

– 35 –

7VU-004

6. Drain the fuel remaining in the carburetor into an

approved container by loosening the drain screw

on the carburetor float chamber.

1 Drain screw

7. Tighten the drain screw.

8. Turn the engine switch to “OFF”.

9. Turn the fuel cock lever to “OFF”.

10. Tighten further if any screws, bolts and nuts are

loose.

11. Store the generator in a dry, well-ventilated place,

with the cover placed over it.

712-010

AE00621

ENGINE

Perform the following steps to protect the cylinder, pis-

ton ring, etc. from corrosion.

1. Remove the spark plug, pour about one table-

spoon of SAE 10W-30 or 20W-40 motor oil into

the spark plug hole and reinstall the spark plug

only. Recoil start the engine by turning over sever-

al times (with ignition off) to coat the cylinder walls

with oil.

2. Pull the recoil starter until you feel compression.

Then stop pulling. (This prevents the cylinder and

valves from rusting).

3. Clean exterior of the generator and apply a rust

inhibitor.

4. Store the generator in a dry, well-ventilated place,

with the cover placed over it.

5. The generator must remain in a vertical position

when stored, carried or operated.

7VU-9-16-B 2/18/11 9:46 AM Page 35

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

No comments

Yamaha EF2800i - Inverter Generator Owner's Manual Page 40