Yamaha EF2800i - Inverter Generator Owner's Manual download pdf (Page 20)

– 15 –

AE00812

APPLICATION RANGE

When using the generator, make sure the total load is within rated output of a generator.

Otherwise, generator damage may occur.

9 Do not overload. The total load of all electrical appliances must not exceed

the supply range of the generator. Overloading will damage the generator.

9 When supplying precision equipment, electronic controllers, PCs, electronic

computers, microcomputer-based equipment or battery chargers, keep the

generator a sufficient distance away to prevent electrical interference from

the engine. Also ensure that electrical noise from the engine does not inter-

fere with any other electrical devices located near the generator.

9 If the generator is to supply medical equipment, advice should first be

obtained from the manufacturer, a medical professional or hospital.

9 Some electrical appliances or general-purpose electric motors have high

starting currents, and cannot therefore be used, even if they lie within the

supply ranges given in the above table. Consult the equipment manufacturer

for further advice.

NOTICE

TIP

9 “–” means below.

9 Application wattage indicates when each device is

used by itself.

9 The simultaneous usage of AC and DC power is

possible but total wattage should not exceed the

rated output.

EX:

9 The overload indicator light comes on when total

wattage exceeds the application range. (See page

17 for more details.)

1 Overload indicator light

Power factor 1 0.8–0.95

0.4–0.75

(Efficiency 0.85)

–2,500W –2,000W –850W

Rated voltage

12V

Rated current

10A

Generator rated output 2,500VA

Frequency Power factor

1.0 –2,380W

0.8 –1,880W

120W

DC —

(12V/10A)

EF2800i

760-021a

7VU-9-16-A 2/18/11 9:45 AM Page 15

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Comments to this Manuals

No comments

Yamaha EF2800i - Inverter Generator Owner's Manual Page 20

Comments to this Manuals