Yamaha PDM-4210 Manual download pdf (Page 44)

ENGLISH

Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.

Customer servicing can be hazardous.

WARNING

Symptom Point to check See page

• The screen becomes dark and the images cannot be seen

during VCR special playback (fast forward, rewind).

• This sometimes occurs when a component output VCR such as

the 480i is connected.

This is not a malfunction; therefore, please take note that this may

occur. When it does occur, change to composite output, or S.video

output.

–

TROUBLESHOOTING

Symptoms That Seemingly Appear to be Failures

This table shows the specifications when the optional video unit has been inserted.

PRODUCT SPECIFICATIONS

• The monitor takes at least 30 minutes to attain optimal picture quality.

Panel

Display

dimensions

Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)

Resolution

1024 (H) x 1024 (V) pixels

Net dimensions

(excluding pedestal)

1030 (W) x 636 (H) x 91 (D) mm

Net weight

(excluding pedestal)

34.9kg

Ambient

conditions

Temperature

Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C

Relative humidity

Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

Power supply

AC100 - 240V, 50/60Hz

Power consumption/at standby

365W / <3W

Audio output

12W + 12W (6Ω)

(RGB input)

Input signals

Input terminals

RGB1 DVI input terminal (DVI-D)

RGB1 audio input terminal (3.5mm Stereo Mini Jack)

RGB2 analog RGB input terminal (D-sub 15-pin)

RGB2 audio input terminal (3.5mm Stereo Mini Jack)

Video signals

0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)

480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60

Sync signals

H/V separate, TTL level [2KΩ]

H/V composite, TTL level [2KΩ]

Sync on green, 0.3 Vp-p [75Ω]

Recommended signal

46 modes

(Video input)

Input signals

Input terminals

AV1: composite video input terminal (RCA)

AV1: Y PB PR video input terminal (RCA)

AV1: L/R audio input terminal (RCA)

AV2: composite video input terminal (RCA)

AV2: Y/G PB/B PR/R video input terminal (RCA)

AV2: L/R audio input terminal (RCA)

AV3: composite video input terminal (RCA)

AV3: S video input terminal (RCA)

AV3: L/R audio input terminal (RCA)

AV4: composite video / S video / RGB / L/R audio input terminal (Scart)

Video signals

AV1: NTSC-M, PAL-M, PAL-N

AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60

AV2: NTSC-M, PAL-M, PAL-N

AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB

AV3: NTSC-M, PAL-M, PAL-N

AV4: NTSC-M, PAL-M, PAL-N

AV4: RGB

Video output Signal

OUTPUT (MONITOR): composite video monitor-output terminal (RCA)

OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)

AV4: composite video / L/R audio monitor-output terminal (SCART)

Recommended signal

13 modes

01_PDM-4210_U_En 2003.11.28 17:12 ページ 43

1 2 ... 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments

Yamaha PDM-4210 Manual Page 44

Comments to this Manuals