Yamaha PDM-4210 Manual download pdf (Page 26)

ENGLISH

Signal Check

Status Display Action

When Mode Display is set to ON,

the input signal is switched or

when the RECALL button is

pressed.

A guide is displayed for the input

terminal and the horizontal and

vertical sync frequency.

When the sync signal is no longer

detected.

• A guide displays No Sync.

Signal, and Power Save (for

approx. 5 sec.)

• When the condition continues

and the sync signal cannot be

detected, the indicator lamp of

the power source changes in

orange and the mode switches

to power save mode.

Recheck the personal computer

power switch status and the

connection status.

When the input signal does not

match the monitor specifications

or is in an unstable state.

"Invalid Scan Freq" appears on

the display panel.

Recheck the input signal

specifications.

30 32

∼

! No Sync. Signal

Changes in the signal status are displayed on the screen as they arise.

OTHER FEATURES (continued)

RGB2

RGB

H : 48.4kHz

V : 60.1 Hz

-- -- Min.

-- -- : -- --

OFF

RGB

! Invalid Scan Freq.

Power Save Mode

When the RGB1, RGB2 input is selected

• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the

computer is not being used to reduce power consumption by this unit.

RGB sync signal

Horizontal Yes No Yes No

Vertical Yes Yes No No

PC signal Active (normal display) Blank (no display)

Operation mode On Off

Indicating lamp Lights green Lights orange

Power consumption 365W

3W or less (RGB1)

1W or less (RGB2 ; 100V

≦

120V)

3W or less (RGB2 ; 120V

＜

≦

240V)

Returning to operating status

• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB1/RGB2 buttons of the remote control to

return the unit to power on mode.

01_PDM-4210_U_En 2003.11.28 17:12 ページ 25

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Comments to this Manuals

No comments

Yamaha PDM-4210 Manual Page 26

Comments to this Manuals