Yamaha S03 User Manual download pdf (Page 18)

MIDI Data Format

1. Channel messages

1.1 Note on/note off

These messages convey keyboard performance data.

Range of note numbers received = 0 (C-2)...60 (C3)...127 (G8)

Velocity range = 1...127 (Velocity is received only for note-on)

When the Multi Part parameter "Rcv NOTE MESSAGE" = OFF, that part will not receive

these messages.

For a drum part*, key-off is not received if the DrumSetup parameter Rcv NOTE OFF =

OFF.

For a drum part, key-on is not received if the DrumSetup parameter Rcv NOTE ON = OFF.

* Drum Part indicates that the Multi Part parameter PART MODE is "set to DRUM,

DRUMS1, DRUMS2."

1.2 Control changes

These messages control volume or pan etc.

Their functions are differentiated by the control number (Ctrl#).

If the Multi Part parameter Rcv CONTROL CHANGE = OFF, that part will not receive

control changes.

1.2.1 Bank Select

This message selects the voice bank.

Control# Parameter Data Range

0 Bank Select MSB 0, 63, 64, 126, 127

(Normal voice, Native voice, SFX

voice, SFX kit, Drum kit)

32 Bank Select LSB 0...127

The Bank Select data will be processed only after a Program Change is received, and then

voice bank will change at that time.

If you wish to change the voice bank as well as the voice, you must transmit Bank Select

and Program Change messages as a set, in the order of Bank Select MSB, LSB, and

Program Change.

Not received when Receive Bank Select in Native System Parameters is set to off.

1.2.2 Modulation

This message is used primarily to control the depth of vibrato, but the depth of the following

7 types of effect can be controlled.

The effect of this message can be changed by the following parameters.

• Multi Part Parameter

1. MW PITCH CONTROL

2. MW FILTER CONTROL

3. MW AMPLITUDE CONTROL

4. MW LFO PMOD DEPTH

5. MW LFO FMOD DEPTH

6. MW LFO AMOD DEPTH

• Effect1 Parameter

7. MW VARIATION CONTROL DEPTH

(Valid when Variation Effect is assigned to a part as Insertion)

Control# Parameter Data Range

1 Modulation 0...127

If the Multi Part parameter Rcv MODULATION = OFF, that part will not receive Modulation.

If the receive channel is a drum part, effects 5 and 6 will not apply.

1.2.3 Portamento Time

This message controls the degree of Portamento (refer to 1.2.9).

Control# Parameter Data Range

5 Portamento Time 0...127

When Portamento (control number 065) is ON, this regulates the speed of the pitch

change.

A value of 0 is the shortest portamento time, and 127 is the longest portamento time.

If the receive channel is a drum part, Portamento Time is not received.

1.2.4 Data Entry

This message sets the value of the parameter which was specified by RPN MSB/LSB (see

1.2.22) and NRPN MSB/LSB (see 1.2.21).

Control# Parameter Data Range

6 Data Entry MSB 0...127

38 Data Entry LSB 0...127

1.2.5 Main Volume

This message controls the volume of each part.

This is used to adjust the volume balance between parts.

Control# Parameter Data Range

7 Main Volume 0...127

When the Multi Part parameter Rcv VOLUME = OFF, that part will not receive Main

Volume.

With a value of 0 there will be no sound, and a value of 127 will be the maximum volume.

1.2.6 Panpot

This message control the panning (stereo location) of each part.

Control# Parameter Data Range

10 Pan 0...64...127

When the Multi Part parameter Rcv PAN = OFF, that part will not receive Panpot.

0 is left, 64 is center, and 127 is right.

1.2.7 Expression

This message controls expression (dynamics within a musical line) for each part.

It is used to create volume changes during a song.

Control# Parameter Data Range

11 Expression 0...127

If the Multi Part parameter Rcv EXPRESSION = OFF, that part will not receive Expression.

1.2.8 Hold1

This message controls sustain pedal on/off.

Control# Parameter Data Range

64 Hold1 0...63,64...127

(OFF, ON)

When this is ON, currently-sounding notes will continue to sound even if note-off

messages are received.

If the Multi Part parameter Rcv HOLD1 = OFF, that part will not receive Hold1.

1.2.9 Portamento

This message controls portamento on/off.

Control# Parameter Data Range

65 Portamento 0...63,64...127

(OFF, ON)

When this is ON, the pitch will change smoothly between notes. The time over which the

pitch changes is adjusted by Portamento Time (see 1.2.3). Also, when the Multi Part

parameter MONO/POLY MODE = MONO, the tone will also change smoothly (legato) if

Portamento = ON.

If any of the following Multi Part parameter settings apply, that part will not receive

Portamento.

• Rcv PORTAMENTO = OFF

• PART MODE=DRUM, DRUMS1, 2

1.2.10 Sostenuto

This message controls sostenuto pedal on/off.

Control# Parameter Data Range

66 Sostenuto 0...63,64...127

(OFF, ON)

If sostenuto is turned on while a note is sounding, that note will be sustained until

sostenuto is turned OFF.

Sostenuto for the specified part is not received when Rcv SOSTENUTO of the part in Multi

Part Parameters is set to off.

1.2.11 Soft Pedal

This message controls soft pedal on/off.

Control# Parameter Data Range

67 Soft Pedal 0...63,64...127

(OFF, ON)

The sound will become mellower when Soft Pedal is ON.

If any of the following Multi Part parameter settings apply, that part will not receive the Soft

Pedal.

• Rcv SOFT PEDAL=OFF

• PART MODE=DRUMÅA DRUMS1ÅA2

1.2.12 Harmonic Content

This message adjusts the resonance of the filter that is specified for the sound.

Control# Parameter Data Range

71 Harmonic Content 0...64...127

(-64...0...+63)

Since this is a relative change parameter, it specifies a boost or cut relative to 64.

Higher values will produce a more distinctive sound.

For some sounds, the effective range may be less than the possible range of settings.

1.2.13 Release Time

This message adjusts the EG release time that was specified by the sound data.

Control# Parameter Data Range

72 Release Time 0...64...127

(-64...0...+63)

Since this is a relative change parameter, it specifies an increase or decrease relative to

64.

Increasing this value will lengthen the release that follows a note-off.

1.2.14 Attack Time

This message adjusts the EG attack time that was specified by the sound data.

Control# Parameter Data Range

73 Attack Time 0...64...127

(-64...0...+63)

Since this a relative change parameter, it specifies an increase or decrease relative to 64.

Increasing this value will make the attack more gradual, and decreasing this value will

make the attack sharper.

1.2.15 Brightness

This message adjusts the cutoff frequency of the low pass filter specified by the sound

data.

Control# Parameter Data Range

74 Brightness 0...64...127

(-64...0...+63)

Since this is a relative change parameter, it specifies an increase or decrease relative to

64.

Lower values will produce a more mellow sound.

For some sounds, the effective range may be less than the possible range of settings.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

Yamaha S03 User Manual Page 18

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha S03