Yamaha PSR-2700 Owner's Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
The PSR-2700 features a built-in digital voice sampling system that lets you digitally
record any sounds from a microphone or line-level source and play those sounds via the
four SAMPLE PADS and/or the keyboard. The Digital Sampling system can record a maxi-
mum of 6 seconds of sound per sample pad, up to a total of 60 seconds. A sampled
“voice” is a complete set of data for the four SAMPLE PADS.
PSR-2700 Digital Sampling
CAUTION
Never interrupt the PSR-2700 power supply - either by unplug-
ging the power cord or by turning the power switch off - during
sampling, during a clear operation, while the PSR-2700 is
processing sampled data (i.e. while “Squeezing” appears on the
display), or while loading sampled voices from disk. Doing so will
result in the loss of all data in the PSR-2700 wave RAM!
VOICE
NAME
FREQ TRIGGER
LEVEL
PITCH
MAPPINGVOICE #
REC
CLEAR
DIGITAL SAMPLING
INPUT LEVEL
MIN MAX
0 dB
6
12
18
24
30
36
SAMPLE PADS
1 2 3 4
Setting the Input Level
For optimum sound quality you’ll need to match the input sensitivity on the PSR-2700 Digital Sampling sys-
tem to the output level of your source. After connecting and preparing your source:
ZEngage the Level Check Mode..............................................................................................................
Press the DIGITAL SAMPLING section [REC] button. “LEVEL
CHECK MODE” will appear on the display and the [REC] indicator will
flash.
CD Player
REC
08:Showtune 001:GrandPno
----LEVEL CHECK MODE----
LINE
SAMPLE IN
MIC
To use the Digital Sampler you’ll need to connect the source you intend
to use to either the rear-panel SAMPLE IN LINE or MIC jack. If you’ll be
recording via a microphone, plug the microphone into the SAMPLE IN
MIC jack. If you’ll be recording from a line-level source such as a cassette
player or other audio playback device, plug the players line output into the
SAMPLE IN LINE jack. If your audio playback device has RCA pin-jack
type outputs you’ll need to acquire a cable or connector converter that al-
lows connection to the PSR-2700’s 1/4-inch mono phone jack.
NOTES
• Be sure to obtain proper permission when sampling copyrighted mate-
rial.
Connections
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 93 94

Comments to this Manuals

No comments