Yamaha PLG150-AN Owner's Manual download pdf (Page 71)

Parameters / PATTERN GENERATOR Window

• CTRL CHANGE (Control Change) Bank

Range: 1 ... 200%

This bank of 16 virtual “knobs” lets you set the Control Change value (for the currently set

Control Change Number below) for each step of the Step Sequencer pattern. This deter-

mines the depth of the Control Change effect. For example, if the Control Change Num-

ber is set to 74 (Brightness, VCF Cutoff), the value here determines the tone or timbre of

the note.

To set the Control Change value, adjust the parameter normally by “turning” the appropri-

ate knob, or move the cursor to the value window above the knob and use the right/left

mouse buttons to step up or down through the available values, or enter the value directly

from the computer keyboard.

• The Control Change Number parameter must be set to an appropriate value for Control

Change to have any effect. Also, use the Control Matrix function along with this to shape the

sound in a variety of interesting and complex ways.

• CTRL CHANGE NO. (Control Change Number)

Settings: Off, 1... 95 (Control Change Numbers 1 ... 95), AT (After Touch)

The Control Number Change setting determines the type of MIDI Control Change which

can be output upon sequencer play. To set this, click on the CTRL CHANGE NO. button

to call up the pop-up value list, and click the desired setting. Once the Control Number is

set, the Control Change value can be set for each note with the knobs. For example, if

you set the Control Number to 74 (Brightness, VCF Cutoff), selecting a different Control

Change event value setting at each step lets you change the tone or timbre of each note

with the Control Change value above. The set Control Change Number value appears to

the left of the button.

Refer to the list of control change numbers and their commonly used controllers. For

more information about MIDI and MIDI Control Change messages, see the PLG150-AN

Owner’s Manual.

• For the following Step Sequencer parameters, you can select multiple knobs by holding down

[Shift] and clicking the desired knobs. This lets you edit all of the selected knobs together as

a group.

Note No.

Velocity

Gate Time

Control Change Value

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 92 93

No comments

Yamaha PLG150-AN Owner's Manual Page 71