Yamaha DTXPRESS III Owner's Manual Page 32
- Page / 216
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
32
Utility Mode
2.
Select the type of bulk data (that will be sent) in the dis-
play shown above and press the [SAVE/ENT] button.
The display shown below will appear.
3-2. Channel 10 Program Change/Channel Event Receive
This enables or disables the DTXPRESS III to receive program
change messages/channel events through MIDI channel 10. Pro-
gram change messages received or transmitted through channel
10 can be used to switch DTXPRESS III drum kits.
It is necessary to set the receive parameter to “on” in this display
in order to switch the DTXPRESS III’s drum kits from a song or
an external MIDI device.
3.
Press the [SAVE/ENT] or [VALUE+] button, the bulk dump
will be carried out.
* Press [VALUE-] to cancel the bulk dump.
When the operation is complete, the LCD will display “Com-
plete” as shown below.
BULK all data
Are you sure ?
* The device number must be set for bulk dumps [3-6. Device
Number, Local Control] (P. 33)
* Refer to the [MIDI Data Format] section (P. 52) for more infor-
mation on bulk dump operations.
BULK sssssssssss
Complete !
Receiving Bulk Data
DTXPRESS III data stored in an external device can be sent
back to the DTXPRESS III’s MIDI IN/TO HOST jack using
Bulk Data Receive.
1. After reading the [Connecting a MIDI Device] (Basic
Guide : P. 14) or the [Connecting a Computer] (Ba-
sic Guide : P. 28) section, connect the MIDI device
or computer to the MIDI OUT jack/TO HOST jack on
the DTXPRESS III. Set the HOST SELECT switch.
2. With the sequencer (song, metronome) stopped,
send bulk data from the external device.
3. When the DTXPRESS III starts receiving data, the
following screen will appear on the LCD.
4. When the DTXPRESS III has completed receiving
all the data, the following screen will appear on the
LCD for a few seconds, then the screen will return to
the original display (before receiving bulk data).
* Before receiving bulk data, it is necessary to match the de-
vice numbers (P. 33 [3-6]) of the DTXPRESS III and the
external device. It is also necessary to enable the
DTXPRESS III to receive exclusive messages (P. 32 [3-3]).
BULK Receiving
Please wait...
BULK Receiving
BULK Received.
q 10PC (Receive Program Change)
This enables or disables the DTXPRESS III to receive program
change messages through MIDI channel 10.
off: Does not receive.
on: Receives.
* Even if the q 10PC parameter is set to “on”, program change
messages from MIDI channel 10 will not be received in the fol-
lowing cases.
• If the w 10 (receive channel event) parameter is set to “off”
• If the [3-3. Receive Program Change/System Exclusive
Message’s] q PC (program change) parameter is set to “off”.
w 10 (Receive Channel Event)
This enables or disables the DTXPRESS III to receive MIDI chan-
nel messages through MIDI channel 10.
off: Does not receive.
on: Receives.
3-3. Receive Program Change/System
Exclusive Messages
This enables or disables the DTXPRESS III to receive program
change messages/system exclusive messages from all MIDI chan-
nels.
q PC (Receive Program Change)
off: Does not receive program change messages.
on: Receives program change messages.
w SySex (Receive System Exclusive Messages)
off: Does not receive system exclusive messages.
on: Receives system exclusive messages.
UT MIDI RECEIVE
10PC= on 10= on
q w
UT MIDI RECEIVE
PC= on SySEx= on
q w
- Français 1
- Italiano 1
- CONTENTS 2
- DTXPRESS 4
- Internal Makeup 4
- Drum Kit Play Mode 6
- About the Song 8
- Song Recording 10
- ■ Song Record Settings 10
- Trigger Setup Edit Mode 11
- TRIG IN= 1 12
- Type= KP 12
- TRIG IN= 1 ( 0%) 12
- Gain=64 MVel= 32 12
- 1-5. Specific Rejection 13
- 1-3. Velocity Curve 13
- 2. COMMON Parameters 14
- Drum Kit Voice Edit Mode 16
- 2. Input Common Parameters 20
- 3. Reverb Parameters 22
- Song Edit Mode 25
- Utility Mode 28
- 1. TG (Tone Generator) Group 29
- 2. SYSTEM Group 30
- 3. MIDI Group 31
- Exclusive Messages 32
- 4. CLK (Click) Group 34
- 5. SEQ (Sequencer) Group 36
- 6. MAP (Drum Map) Group 37
- Procedure 39
- Mode d’emploi 41
- TABLE DES MATIERES 42
- Tampon de données pour 44
- Mode de kit de batterie 46
- 3. Trigger Setup 47
- A propos du morceau 48
- Procédure 51
- 2. Paramètres communs COMMON 54
- 1-1. Voice (Voix) 58
- 1-2. Volume, Panoramique 58
- 1-3. Tuning (Accordage) 58
- 2-4. Mode Hold 61
- 2-6. Fonction 61
- 4. Configuration 63
- Mode d’édition de morceau 65
- 5. Quantize (Quantification) 66
- Mode Utilitaire 68
- 1-1. Egaliseur (EQ) 69
- 1-2. Mute 69
- 1-4. Volume 69
- 2. Groupe du SYSTEME 70
- 3. Groupe MIDI 71
- Réception de blocs de données 72
- 5. Groupe SEQ (Séquenceur) 76
- 6-1. Voice (Voix) 77
- 6-3. Tuning (Accordage) 77
- Referenzhandbuch 81
- Internes Design 84
- Modus: Drum Kit Play 86
- Über die Songs 88
- Song-Aufnahme 90
- Modus: Trigger Setup Edit 91
- 2-1. Hi-Hat Offset 94
- 2-2. Wert erhöhen/verringern 94
- Modus: Drum Kit Voice Edit 96
- 2-1. Cross Fade 100
- 2-2. Reverb Send 100
- 2-7. Pad Song 101
- 2-4. Hold Mode 101
- 2-5. Key Off Enable 101
- 2-6. Function 101
- 2-8. Rim To Pad 102
- 3-1. Reverb Type, Time 102
- 3-2. Reverb Master Return 102
- 4. Setup 103
- Modus: Song-Edit 105
- 3. Lautstärke, Panorama 106
- 4. Song kopieren 106
- Bedienung 106
- 5. Quantisierung 106
- Modus: Utility 108
- 1. Gruppe TG (Tongenerator) 109
- 2. Gruppe SYSTEM 110
- 3. Gruppe MIDI 111
- Empfang von Bulk-Daten 112
- 3-4. Programmwechseltabelle 113
- 3-5. MIDI-Modus 113
- 3-7. MIDI Merge 113
- 4. Gruppe CLK (Click) 114
- 4-4. Notennummer des Clicks 115
- 4-5. Click-Modus 115
- 5. Gruppe SEQ (Sequenzer) 116
- 6. Gruppe MAP (Drum Map) 117
- 6-4. Layer-Balance 118
- 6-5. Decay, Cutoff-Frequenz 118
- 6-6. Reverb Send 118
- 6-8. Key Off Enable 119
- 6-9. Map kopieren 119
- Manual de instrucciones 121
- CONTENIDO 122
- TRIG ´´´´´´´´´´ 127
- 1 STD Med 1 127
- GRV -----¨ 127
- Groov=0 Avg=0 127
- Acerca de la canción 128
- Grabación de canción 130
- Procedimiento 131
- 1-3. Curva de velocidad 133
- 1-4. Autorechazo, rechazo 133
- 1-5. Rechazo específico 133
- 2. Parámetros COMUNES 134
- TRIG Common 135
- In Excg= normal 135
- TrgName=Medium 135
- KIT IN=kick V=1 137
- =K/019 BDaftty1 137
- 1-1. Sonido 138
- 1-2. Volumen, panorámico 138
- 1-3. Afinación 138
- 1-4. Balance de capas 139
- 1-6. Número de nota 139
- 2-1. Atenuación cruzada 140
- 2-2. Enviar reverberación 140
- 2-4. Modo sostenido 141
- 2-6. Función 141
- 2-7. Canción de pad 141
- 2-8. Aro a pad 142
- 4. Configuración 143
- Modo de Edición de canción 145
- 3. Volumen, panorámico 146
- 4. Copia de canción 146
- 5. Cuantización 146
- Modo Utilidades 148
- 1-1. Ecualizador (EQ) 149
- 1-2. Silenciamiento 149
- 1-4. Volumen 149
- 1-5. Bypass de reverberación 149
- 2. Grupo SISTEMA 150
- 3. Grupo MIDI 151
- Recepción de datos volcados 152
- 3-5. Modo MIDI 153
- 3-7. Fusión MIDI 153
- 4. Grupo CLK (Metrónomo) 154
- 4-5. Modo de metrónomo 155
- 5. Grupo SEQ (Secuenciador) 156
- 6-1. Sonido 157
- 6-2. Volumen, panorámico 157
- 6-3. Afinación 157
- 6-6. Envío de reverberación 158
- 6-4. Balance de capas 158
- 6-9. Copia de mapa 159
- Manuale dell’utente 161
- SOMMARIO 162
- ● Dati Trigger Setup 164
- ● Dati Drum Kit 164
- Modo Drum Kit Play 166
- Circa la Song 168
- Registrazione della Song 170
- (song record) 170
- Modo Trigger Setup Edit 171
- 2. Parametri COMMON 174
- Modo Drum Kit Voice Edit 176
- 1-1. Voice 178
- 1-2. Volume, Pan 178
- 1-3. Tuning 178
- 1-4. Layer Balance 179
- 1-6. Note Number 179
- 1-5. Decay, Cutoff Frequency 179
- 1-7. Channel, Gate Time 179
- 2. Parametri Input Common 180
- 3. Parametri Reverb 182
- 5. Parametri Drum Kit Common 184
- Modo Song Edit 185
- Modo Utility 188
- * Tipi di Voci Drum 189
- Voice List] (pag. 40) 189
- 2. Gruppo SYSTEM 190
- 3. Gruppo MIDI 191
- Messages 192
- 3-4. Program Change Table 193
- 3-5. MIDI Mode 193
- 4. Gruppo CLK (Clic) 194
- 4-3. Click Volume, Tuning 195
- 4-4. Click Note Number 195
- 4-5. Click Mode 195
- 4-6. Click Out Select 195
- 5. Gruppo SEQ (Sequencer) 196
- 6. Gruppo MAP (Drum Map) 197
- 6-4. Layer Balance 198
- 6-5. Decay, Cutoff Frequency 198
- 6-9. Map Copy 199
- Procedura 199
- Drum Voice List 200
- GM Keyboard Voice List 204
- Preset Drum Kit List 204
- Trigger Setup List 211
- Preset Song List 211
- MIDI Data Format 212
- TRIGGER SETUP BLANK CHART 215
- WC35850 Printed in Japan 216
Related products and manuals for Musical Instruments Yamaha DTXPRESS III
Musical Instruments Yamaha AN200 User Manual
(72 pages)
(72 pages)
Musical Instruments Yamaha PSR-730 User Manual
(176 pages)
(176 pages)
Musical Instruments Yamaha RY30 Owner's Manual
(123 pages)
(123 pages)
Musical Instruments Yamaha 860 User Manual
(18 pages)
(18 pages)
Musical Instruments Yamaha TG77 User Manual
(19 pages)
(19 pages)
Musical Instruments Yamaha AN1x User Manual
(20 pages)
(20 pages)
© 2020, manymanuals.com. All rights reserved. | 1.723 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals