Yamaha DTXPRESS III Owner's Manual download pdf (Page 12)

TRIG IN= 1

Type= KP

TRIG IN= 1 ( 0%)

Gain=64 MVel= 32

Level Display

Trigger Setup Edit Mode

1. INPUT Parameters

Contains specific settings for each of the pads (1-10).

This function is divided into the following 6 pages.

1-1. Pad Type.......................................................... 12

1-2. Gain, Minimum Velocity ................................... 12

1-3. Velocity Curve ................................................. 13

1-4. Self Rejection, Rejection ................................. 13

1-5. Specific Rejection ............................................ 13

1-6. Trigger Setup Copy.......................................... 14

1-1. Pad Type

Sets the type of pad or trigger sensor that is connected to the trig-

ger input jack q. By selecting the appropriate pad type, pad func-

tions can be used to their full potential.

q TRIG IN (Trigger Input Number)

[Range] 1-10

Assigns the trigger input jack number for the pad you want to edit.

* According to the setting in the utility mode’s [2-1. Learn Mode]

(P. 30) trigger input jack numbers can be assigned by hitting the pad.

w Type (Pad Type)

Sets the type of pad that is connected to the trigger input jack

assigned in q TRIG IN.

* Values set in [1-2. Gain, Minimum Velocity] (P. 12) and [1-4. Self

Rejection] (P. 13) will automatically select the proper value for

the pad type you set here.

* The “HH contrler” can only be assigned to Input Jack 1. Con-

nect the Hi-hat Controller HH65, HH60, HH80 or HH80A to Input

Jack 1 and set to “HH contrler” to use in place of a kick pedal.

Use a cable with a stereo plug when connecting a Hi-hat controller.

Pad types are defined as follows.

KP KP80S/80/65/60

TP1/SnrA TP65S/65 (mainly used as a snare pad) *1

TP1/SnrB TP65S/65 (mainly used as a snare pad) *1, *2

TP1/Tom TP65S/65 (mainly used as a tom pad) *1

TP2-A TP80S/80/65/60 *3

TP2-B TP80S/80/65/60 *3

PCY1 PCY150S

PCY2 PCY130S/130

PCY3 PCY80S/80/65S/65/80/10

RHH RHH130

RHP Pad RHP120SD/120/100/80 (pad side) *4

RHP Rim RHP120SD/120/100/80 (rim side) *4

RHP Kick KP120

BP BP80 *5

DT Snare DT series drum trigger (for a snare drum)

DT HiTom DT series drum trigger (for small toms)

DT LoTom DT series drum trigger (for large toms)

DT Kick DT series drum trigger (for bass drum)

misc 1 - 6 Another manufacturer’s pad 1 - 6.

HH contrler

The HH65/60 Hi-Hat-Controller can be connected

to Trigger Input 1 and used as a kick drum pedal.

*1 When the TP65S is connected to In-

put 2/6/7, its 3-zone function is avail-

able (pad x1, rim sound x2). If the pad

is connected to any other input, the

rim will produce only one sound.

For closed rim shots, sensitivity is set

high on TP1/SnrA rim 1 and TP1/

SnrB rim 2. Sensitivity settings for

right and left rims are identical on TP1/Tom.

*2 Rim1 and rim2 sounds on the TP1/SnrB are reversed from

those on TP1/SnrA. This provides left-handed drummers with

a proper setting when using a left-handed setting.

*3 When the TP80S is connected to Input 2/6/7, the voice as-

signed to rim 1 will be produced by TP2-A (Input 2:snrR1,

Input 6:rideE, Input 7:crashE), and the voiced assigned to

rim 2 will be produced by TP2-B (Input 2:snrR2, Input6: rideC,

Input 7:crashC). (

Refer to page 17.

)

*4 To use an RHP series pad as a stereo pad, connect it to Input

9/10 and assign the pad voice to Input 9 and rim voice to Input

10. If the pad is connected to any other input, the rim sound will

not be produced.

To use the BP80 as a stereo pad, connect the pad to Input 9/10.

1-2. Gain, Minimum Velocity

This function sets the input sensitivity (Gain) and velocity range

(Minimum Velocity) for each input jack q.

q TRIG IN (Trigger Input Number)

Assigns the trigger input jack number. (The same procedure as in

[1-1. Pad Type]).

w GAIN (Input Gain)

[Range] 0-99

Adjusts the input gain level (minimum sensitivity) for the trigger

input jack assigned in step q TRIG IN.

Entering a larger value here allows smaller input levels to sound

the voice.

* This value will be automatically set after the appropriate pad

type is set in [1-1. Pad Type]. Some fine-tuning of the value will

be necessary.

e MVel (Minimum Velocity)

[Range] 1-127

Sets the MIDI Velocity (volume) that is transmitted when the pad

is hit the weakest. Large values will produce a high volume level

even if the pad is hit softly. However, this will result in a narrow

volume range making it difficult to adequately produce wider dy-

namic levels.

Rim 1

Rim 2

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 215 216

Yamaha DTXPRESS III Owner's Manual Page 12

Comments to this Manuals

Yamaha DTXPRESS III Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha DTXPRESS III