Yamaha CVP-49 Specifications download pdf (Page 31)

Performance Memory

The BASS volume control can be used while holding the [MIDI/TRANSPOSE] button to

independently adjust the volume of track 1 or 2. The volume of the rhythm track is adjusted

via the RHYTHM volume control. Please note that volume settings can only be decreased.

Individual track reverb depth can be adjusted by using the BASS volume while holding the

[REVERB] button, and the overall reverb depth can be adjusted by using the TEMPO [▲]

and [▼] buttons while holding the [REVERB] button.

Also note that the tempo, reverb type, style, style variation, fill-in, and intro/ending settings

are common to all tracks and cannot be set independently for different tracks.

● Erasing the Tracks

Individual tracks — except the rhythm track — can be completely erased by starting and

stopping recording without actually playing or changing any parameters (i.e. press the

[START/STOP] button twice). The same procedure can be used to erase the rhythm track if

the RHYTHM volume control is set to its minimum position.

Another way to erase data in individual tracks is to stop recording within two beats of start-

ing. In this case, any recorded data will be ignored and any previous data will be erased for

the selected track.

● Playing Back only Specific Parts

The [1], [2], [ABC], and [RHYTHM] buttons can be used to select playback of specific

parts. When a part is on, the corresponding green indicator lights.

● Volume Control

The RHYTHM, BASS, CHORD 1, and CHORD 2 volume controls can be used to adjust

the volume of the corresponding accompaniment parts when playng back data that was

recorded with ABC.

When playing back data that was recorded without ABC, however, these volume controls

have the following track assignments.

RHYTHM: RHYTHM track

BASS: No assignment

CHORD 1: No assignment

CHORD 2: 1 & 2 tracks

MIDI/

TRANSPOSE

BASS

Volume of track 1 or 2

RHYTHMABC

Start playback by pressing either the PERFORMANCE MEMORY [START/STOP] button

or the ABC [START/STOP] button. The song will play through to the end and playback will

stop automatically. The current measure number will be shown on the TEMPO display during

playback.

Playback can be stopped at any time by pressing the PERFORMANCE MEMORY or ABC

[START/STOP] button.

NOTES

• The playback voice cannot be changed when playing back Performance Memory data (the voice

played via the keyboard can be changed).

• All Performance Memory data will be retained in memory for about one week after the power is

turned off. If you want to keep your recorded data for longer periods, turn the power on for a few

minutes at least once a week. It is also possible to store it to an external MIDI storage device

such as the Yamaha DOU-10 Disk Orchestra Unit by using the Performance Memory Data Send

function described on page 34.

• The track indicators will not light automatically when the power is turned on even if the Perform-

ance Memory contains data. It is therefore necessary to press the track buttons so that the corre-

sponding green indicators light before starting Performance Memory playback. It is also a good

idea to press the track buttons to check if the tracks contain data before recording (do this before

pressing the [REC] button). If the green indicator lights when the corresponding track button is

pressed, that track contains data which will be erased and replaced by the newly-recorded data.

• If the green indicator of the data-containing track is not lit (i.e. playback is turned off) before the

record ready mode is engaged, the track will remain off even after the record ready mode is

engaged. The data-containing track indicator is automatically lit only when the record ready

mode is engaged for the first time after the power is turned on (before any track buttons are

pressed).

• If the metronome is being used during playback, the metronome will stop when playback is

stopped.

START/STOP

NOTES

• All data in all tracks can be simultaneously erased by turning the power on while holding the

rightmost (G6) key on the keyboard.

■ Playback

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Comments to this Manuals

No comments

Yamaha CVP-49 Specifications Page 31

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha CVP-49