Yamaha MX200-16 User's Guide download pdf (Page 30)

MMXX220000 UUttiilliittiieess

buttons simultaneously.

2. Press the Audition button repeatedly

until

In appears in the Program

Display

. The Program Display flashes

between

In and dI if the digital input is

selected. If you want to disable the

digital input and use the analog inputs,

turn the

Program Select knob until the

Program Display reads An to select the

analog input.

3. Press the

Store button to save this

change.

Digital Out Dry Track

The MX200 can send unprocessed digital

audio (Dry Track) out the S/PDIF Digital

Out while monitoring processed audio

through the analog outputs. This is useful

when you want to record a dry perform-

ance digitally, but also hear effects pro-

cessing while you a recording.

Note: The Dry Track feature is only avail-

able for signals brought into the MX200 via

the analog inputs. Dry Track has no effect

on signals being received at the

S/PDIF In.

Digital in/out signals are processed normal-

ly regardless of whether the Dry Track

parameter is enabled or disabled.

To enable

Dry Track:

1. Press both the

Store and Audition

buttons simultaneously.

2. Press the Audition button repeatedly

until

dt appears in the Program

Display

. The Program Display flashes

between

dt and Of

3. Turn the Program Select knob until the

Program Display reads On to enable

the

Dry T

rack

feature.

4. Press the Store button to save this

change.

Stereo and Mono Output

Modes

The MX200 outputs can be either Stereo

or Mono depending on your application

needs. When Stereo Output Mode is

selected (MX200’s default Output Mode),

the signals maintain stereo separation as

configured by the

Routing button. When

Mono Output Mode is selected, both Left

and Right output signals are summed to

mono and then sent out the Left output.

To select Mono or Stereo Output Modes:

1. Press both the

Store and Audition

buttons simultaneously until Ut appears

in the

Program Display.

2. Press the Audition button repeatedly

until

OP appears in the Program

Display

. This is the Output Mode setup

menu.The Program Display

alternately flashes OP and then St

to indicate Stereo Output Mode is

selected.

3. To change the Output Mode to Mono,

turn the

Program Select knob until no

appears in the Program Display

indicating Mono Output Mode is now

selected.

4. Press the

Store button to save these

changes.

Note: When Mono Output Mode is select-

ed, effects like Panner and Pong Delay will

no longer have left to right animation as

they do when Stereo Output Mode is

selected.

Factory Program Banks:

Serial and Parallel

The MX200 has two sets of Factory pro

-

gram banks: the Parallel bank and Serial

bank. The Parallel processing bank is used

when the MX200 is configured in an

Auxiliary Send/Return setup with a mixer

.

The Serial bank is designed for use when

24

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Comments to this Manuals

No comments