Yamaha MX200-16 User's Guide download pdf (Page 12)

1. Power Jack

Connect only the included Harman Pro

PS0913B power supply here.

2. Footswitch Input

An optional 2-button footswitch can be

plugged into this TRS jack for independent

Bypass control of P1 and P2. Use the

Lexicon

®

LEX-DFS or a 2-button footswitch

wired as follows:

Tip = Bypass 2

Ring = Bypass 1

Sleeve

= Ground

3. MIDI In, Out/Thru

Provides MIDI operation capabilities. Two

5-pin MIDI DIN connectors are available

for MIDI IN and MIDI OUT/THRU. (See

page 37 for MIDI Implementation chart.)

4. USB Port

Provides communication with a computer

for use with MX-Edit

TM

software and MX200

plug-in window using a standard USB

cable. When the MX200 is connected to a

computer via USB,

US briefly appears in

the

Program Display window.

5. S/PDIF Digital In/Out

Digital input accepts 44.1kHz / 48kHz sig-

nals. When the S/PDIF digital input is

selected and active, the

Digital In LED on

the front panel lights.

Important: It is recommended that you do

not connect any digital device to the

MX200’s S/PDIF input that transmits at any

other sample rate (such as 96kHz). Doing

so can cause unpredictable performance.

Make sure the device you are connecting

to the MX200’s

S/PDIF In is set as the

Clock Master (if that option is available)

and transmitting at a sample rate of

44.1kHz or 48kHz only. As with any other

connection, if you need to unplug the

S/PDIF cable, it is recommended that you

switch to the analog inputs (see

Digital

Input Select in the Utility section) or

bypass both processors before disconnect-

ing the cable.

6. Balanced Analog Line Outputs

Left and Right RF-filtered 1/4”

balanced/unbalanced TRS line outputs are

servo-balanced, so no signal loss is

incurred when using unbalanced connec-

tions. To use the

Left output as a mono

sum of both

Left and Right signals, refer

to the

Stereo/Mono Output Mode Utility

section on page 24.

7. Balanced Analog Line Inputs

Left and Right active analog 1/4” TRS bal-

anced/unbalanced line inputs. If only a sin-

gle plug is connected to the

Left input, the

signal is split and sent to both the

Left and

Right input paths.

DDiiaaggrraamm -- RReeaarr PPaanneell

1

23 4 6 7

5

6

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments