Yamaha DTX400K Owner's Manual download pdf (Page 59)

Troubleshooting

DTX400K/DTX430K/DTX450K Owner’s Manual

If you notice double triggering, crosstalk, or skipped sounds (as described below), proceed as follows.

 Double triggering—i.e., multiple sounds are produced in response to a single strike:

• If the pad or drum trigger in question features a controller for adjusting output or sensitivity, turn it down.

• Ensure that the Gain parameter from Menu Mode is not set too high. (See page 49)

 Crosstalk—i.e., a sound is produced by a pad other than the one that was struck:

• Adjust the Crosstalk parameter from Menu Mode to a suitable level for each affected pad. (See page 47)

 Skipped sounds—i.e., a pad does not produce a sound (usually during rolls or fills):

• Adjust the Crosstalk parameter from Menu Mode to a suitable level for each affected pad. (See page 47)

Other common questions

 How do I make the drum module store it settings?

• The drum module automatically stores its settings whenever you turn it off using the [ ] (Standby/On) button.

(See page 20)

 How do I reset all of the drum module’s parameters to their default settings?

• You can restore default settings using the Factory Set function. (See page 20)

 How do I reset all of the drum module’s parameters to the settings they had when I last turned it on?

• You can do this using the Revert to Last Power On function. (See page 55)

 How do I stop the drum module turning off while I’m using it?

• Disable the Auto Power-Off function. (See page 20)

 How do I stop the drum module changing the current drum kit when I select a different song?

• By default, your drum module always chooses the best kit for each song. To prevent it from doing so, enable the

Kit Lock function. (See page 53)

 How do I have the drum module choose the best drum kit for each song?

• Disable the Kit Lock function. (See page 53)

 What should I do if I can’t hear the voice guidance?

• Adjust the Voice Guidance Volume parameter from Menu Mode. (See page 53)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

No comments

Yamaha DTX400K Owner's Manual Page 59