–4–
CABLE ROUTING
SPEC
1 Throttle cables
2 Clutch cable
3 Left handlebar switch lead
4 Starter cable
5 Main switch lead
6 Front brake hose
7 Right handlebar switch lead
A Install the headlight relays onto the headlight housing bridge.
B Route the headlight lead through the plastic guide.
C Route the headlight lead through the headlight bracket right side, and
connect relay.
D Don’t kink.
E Put coupler into stay.
F Make sure the connector is out off the bottom end of front cowling.
G Route the right handlebar switch lead in front of the front fork inner tube.
H Route the throttle cables between the brake hose and right handlebar
switch lead.
I Route the wire harness through under the left handlebar switch lead
and starter cable.
J Fasten the left handlebar switch lead to the front fork with a plastic lock-
ing tie and cut the end of locking tie.
K Fasten the throttle cables and starter cable with a band.
EB206000
CABLE ROUTING
Comments to this Manuals