– 49 –
3-3 Cylinder Head Installation Precautions
• For cylinder head installation, apply engine oil to the tightening bolts and washers
and install in the tightening sequence.
• Tighten the bolts and washers three times, each to the following torque value.
1st: 19 Nm (1.9 m·kg)
2nd: 35 Nm (3.5 m·kg)
3rd: 50 Nm (5.0 m·kg)
• After tightening, half-fill oil in the bolt installation holes on the sprocket side.
Comments to this Manuals