Yamaha YZF-R6 L 2000 Specifications download pdf (Page 8)

– 4 –

4. Remove the cylinder head cover, then the four collars fitted in the head cover, and

install the PIN (93608-16M16).

5. After removing the hose that was connected from the air-cut valve assembly to the

air filter case, push in the plug (90338-08026) on the air filter side to clog up.

4. Head Gaskets

• The standard gaskets have a thickness of 0.60 mm.

• These gaskets are used to adjust squish height. They are normally used at a squish

height of -75 (0.45 mm). In the case of machining the cylinder (upper case), always

make sure to measure the squish height and select the gaskets so that it is 0.60 mm

or more.

NOTE:

Squish height refers to the clearance between the flat surface of the piston and the

surface along the head cylinder.

Parts List

No. PART No. PART NAME Q'TY REMARKS

1 5SL-11181-70 GASKET, HEAD CYL. 1 t=0.40 mm

2 5SL-11181-75 GASKET, HEAD CYL. 1 t=0.45 mm

3 5SL-11181-80 GASKET, HEAD CYL. 1 t=0.50 mm

4 5SL-11181-85 GASKET, HEAD CYL. 1 t=0.55 mm

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 72 73

No comments

Yamaha YZF-R6 L 2000 Specifications Page 8