Control cables
• Make sure that operation is smooth.
6-21
• Lubricate if necessary.
• Check chain slack.
Drive chain
• Adjust if necessary.
6-19/6-20
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
Wheels and tires
• Check tire condition and tread depth.
6-13
• Check air pressure.
• Correct if necessary.
Brake and shift pedals • Make sure that operation is smooth.
6-21
• Lubricate pedal pivoting points if necessary.
Brake and clutch levers • Make sure that operation is smooth.
6-21
• Lubricate lever pivoting points if necessary.
Sidestand
• Make sure that operation is smooth.
6-21
• Lubricate pivot if necessary.
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
–
• Tighten if necessary.
Instruments, lights, • Check operation.
–
signals and switches • Correct if necessary.
Engine stop switch • Check operation. 3-3
Sidestand switch
• Check operation of ignition circuit cut-off system.
3-11
• If system is defective, have Yamaha dealer check vehicle.
PRE-OPERATION CHECKS
4-3
4
1D0-F8199-E2.qxd 20/9/04 11:32 Página 26
Comments to this Manuals