Yamaha 6Y8- 2819U-00 Owner's Manual download pdf (Page 18)

TRIM 0SET (setting trim angle)

You can set the trim angle to zero. Fully trim

the outboard motor down.

1. Turn the engine off and the engine start

switch to ON.

2. (4 seconds): To activate the cus-

tom mode.

3. : To switch between the setting

function names.

4. : To switch to the zero adjustment

display.

5. + (1 second): To adjust the

trim angle to zero using the current trim

position as the standard value.

6. (1 second): To return to the nor-

mal display.

NOTE:

Press the button for 1 second from

step 4 to cancel the adjustment of the trim

angle to zero and return to the custom mode

selection display.

DISPLAY (setting displays)

You can change the display configuration of

the normal display. There are a total of 16

combinations of which up to four displays

can be set up.

The display configuration numbers that have

been selected as the default display config-

uration are indicated by the shaded areas

in the table below.

Changing the display configurations:

1. Turn the engine off and the engine start

switch to ON.

Display

configuration No.

Cooling water/

engine temperature

Cooling water

pressure

Battery voltage

Oil pressure/

Oil level

Total hour,

Trip hour

—————

— —

——

———

—— —

———

—— —

— — —

————

— ———

— — — —

——— —

— — — —

:Displayed

TRIM 0SET (setting trim angle)/DISPLAY (setting displays)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Comments to this Manuals

No comments

Yamaha 6Y8- 2819U-00 Owner's Manual Page 18

Comments to this Manuals