Yamaha 6Y8- 2819U-00 Owner's Manual download pdf (Page 69)

64

Setting up the

meters

Setting the initial settings

Before operating the meter, be sure to

change the default settings as described

below. For the setting procedures, see the

corresponding setting procedure for each

meter.

Tachometer unit

ENGINE NUMBER (setting corresponding

engine)

Select the engine compatible to this meter.

(See page 19.)

TRIM 0SET (setting trim angle)

Adjust the trim angle to zero. (See page 13.)

DISPLAY (setting displays)

When the optional cooling water pressure

sensor is connected, change the display

configuration number so that it can be dis-

played in the cooling water pressure display.

When the oil pressure display function is not

available on your model, change the display

configuration number so that the oil pres-

sure display is not included. (See page 13.)

Speedometer unit

FUEL SENSOR (setting fuel sensor)

Set the fuel sensor according to the fuel

tank type. (See page 33.)

DISPLAY (setting displays)

When the optional Triducer-Multi sensor and

GPS are connected, change the display

configuration number to display the ambient

water temperature, depth, and clock dis-

plays. (See page 30.)

Fuel management meter unit

TANK CAPA. (setting fuel tank capacity)

Set the capacity of the connected fuel tank.

(See page 44.)

DISPLAY (setting displays)

Change the display configuration number as

necessary so that the AVAL display can be

displayed. (See page 42.)

Speed & Fuel meter unit

FUEL SENSOR (setting fuel sensor)

Set the fuel sensor according to the fuel

tank type. (See page 61.)

DISPLAY (setting displays)

When the optional Triducer-Multi sensor and

GPS are connected, change the display

configuration number to display the ambient

water temperature, depth, and clock dis-

plays. (See page 57.)

Setting the initial settings

1 2 ... 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments