Yamaha 6Y8- 2819U-00 Owner's Manual download pdf (Page 26)

Resetting engine number

When replacing the engines of multiple out-

board motors or resetting the setting order,

reset all engine numbers to “No. 1 (engine

number 1).”

1. Turn the engine off and the engine start

switch to ON.

2. (10 seconds): “ENGINE No.

RESET” will be displayed for 1 second.

3. Turn the engine start switch to OFF.

The engine number is reset after

approximately 10 seconds.

4. Turn the engine start switches to ON in

order from port to starboard.

NOTE:

• The engine numbers are stored in the

ECM (Engine Control Module) of each

engine for engine identification.

• The engine numbers are stored in the

ECM (Engine Control Module) when, the

engine start switch is first turned to ON

after being connected. The numbers are

stored in the order from number one to

number four starting from the port out-

board motor. When multiple outboard

motors are installed, be sure to wait at

least 2 seconds before turning each

engine start switch to ON.

Service functions

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

No comments

Yamaha 6Y8- 2819U-00 Owner's Manual Page 26