Yamaha YVC-MIC1000EX User Manual download pdf (Page 34)

When the product detects a problem related to acoustic conditions, you can confirm its details using the voice

guidance.

(For details, refer to "When automatic audio tuning has ended abnormally (problem detection)" (page 26) and

"Detecting acoustic conditions in general use" (page 26)".

Take the appropriate actions - outlined below - to resolve the detected problem.

Warning guidance list

Voice guidance: Cause Action

Please connect the

microphones. Automatic audio

tuning cannot start.

• A microphone cable has been

unplugged.

• A microphone cable is not connected

correctly.

Correctly connect the microphone cable to

the microphone or the Control Unit.

(→ page 10)

The volume is set too low.

Automatic audio tuning cannot

start.

The speaker volume is set low. Turn up the speaker volume level so that

four or more lamps light up on the level

indicator. (→ page 29)

The external speakers are not

working. Please refer to the

User's manual and check the

external speaker settings.

• An audio cable has been unplugged.

• An audio cable is not connected

securely.

Securely connect audio cables to external

speakers or the Control Unit.

(→ page 24)

The volume of an external speaker is low. Turn up the volume of the external

speaker. (→ page 29)

The distance between the

speakers and the microphones

is too close. The maximum

volume is now limited.

The Control Unit or external speakers are

too close to the microphones.

Place all the microphones at least 1 m

(3.3 ft) away from the Control Unit or

external speakers. (→ page 23, 24)

The microphones are too far

from the speakers. Please refer

to the User's manual.

The Control Unit is placed too far from

the microphones.

Place all the microphones within 20 m

(66 ft) away from the Control Unit.

(→ page 23)

A latency problem has been

detected on the external

speakers. Please refer to the

User's manual and use suitable

external speakers.

A high latency has been detected on the

external speakers.

Place all the external speakers within 20 m

(66 ft) away from all the microphones.

(→ page 24)

If the problem recurs, replace with

external speakers with a low latency.

A sound distortion problem

has been detected on the

external speakers. Please refer

to the User's manual and check

the external speaker settings.

The external speaker is set to the high

volume.

Turn down the volume of the external

speaker. (→ page 29)

The external speakers have high

distortion.

Replace with an external speaker that has

low distortion.

A source of noise has been

detected near the microphones.

To improve the audio quality,

please move the microphones

or the source of noise.

There is a device that generates noise near

a microphone.

Keep the microphone away from any

noise sources.

The noise is exceeding the

normal level. The audio quality

is degraded.

High noises are generated in the entire

space in which the product is installed.

If there is a device that generates noise,

turn its power off.

To improve audio quality,

please perform automatic

audio tuning.

—

Press the tuning fork button ( ) for

2 seconds or more to carry out automatic

audio tuning. (→ page 25)

1 2 ... 29 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments

Yamaha YVC-MIC1000EX User Manual Page 34

Comments to this Manuals

Related products and manuals for Microphones Yamaha YVC-MIC1000EX