Yamaha YVC-MIC1000EX User Manual download pdf (Page 30)

When external speakers are not connected or only the

built-in speaker is enabled, press the volume + and -

buttons ( ) to adjust the volume.

If external speakers are enabled, perform the following

procedure to suit the environment they are used in.

■ When both the built-in speaker and

external speakers are enabled:

1. Set the volume of external speakers to the minimum.

2. Press the volume + and - buttons ( ) to adjust the

volume of the built-in speaker.

3. Adjust the volume of external speakers.

■ When only external speakers are

enabled:

First, take steps 1 to 3 described below to fix the volume

of the external speakers. Then, use the volume + and -

buttons ( ) of the product to adjust the volume

when you are using the product.

1. Set the volume of external speakers to the minimum.

2. Press the volume + button ( ) to set the volume to

the maximum.

3. Adjust the volume of the external speakers to the

maximum level available during use.

4. Press the volume + and - ( ) buttons to adjust the

volume to the desired level.

When adjusting the speaker volume, be careful to cause

no sound cracking. Sound cracking may cause an echo

phenomenon on the other side.

If you operate the volume + and - buttons ( ) of the

Control Unit, you can adjust the volume of both the built-in

speaker and external speakers.

If a PC or a Mac is connected using the USB cable, its speaker

volume is adjusted synchronously.

Temporarily stop the microphone so that the other party

does not hear a voice in this side.

■ Muting the microphone

Press the microphone mute button ( ).

The microphone status indicator lights up red, and

microphone muting starts.

■ Canceling microphone muting

Press the microphone mute button ( ) during

microphone muting.

The microphone status indicator lights up green, and

microphone muting is canceled.

The microphone muting function is synchronized with all

microphones. If one microphone is muted while multiple

microphones are connected, all of them are muted.

Temporarily mute the speaker so that incoming sounds

cannot be heard.

This function is available only when a PC or a Mac is

connected using the USB cable.

■ Muting the speaker

Mute the speaker on a PC or Mac.

The volume + and - buttons ( ) flash green, and the

speaker is muted.

■ Unmuting the speaker

Unmute the speaker on a PC or Mac that has been

muted.

The volume + and - buttons ( ) light up green, and

the speaker is unmuted.

Adjusting the speaker volume

Note

Muting the microphone

Muting the speaker

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments

Yamaha YVC-MIC1000EX User Manual Page 30

Comments to this Manuals

Related products and manuals for Microphones Yamaha YVC-MIC1000EX