Yamaha SA500 User Manual download pdf (Page 180)

User’s Manual 8-8

Optional Devices

5. Seat the memory module cover in place and secure it with one screw.

Figure 8-5 Seating the memory module cover

6. Install the battery pack - refer to Replacing the battery pack section in

Chapter 6, Power and Power-up Modes, if required.

7. Turn your computer over.

8. Turn the computer on and make sure the added memory is recognized -

to confirmed it, Start → Control Panel → System and Maintenance →

System icon.

■ Align the grooves along the edges of the memory module with the

locking tabs on the connector and insert the memory module into the

connector firmly. If you find it difficult to install the memory module,

gently prise the locking tabs outwards using the tip of your finger.

Please also ensure that you hold the memory module along its left and

right hand edges - the edges with the grooves in.

■ Never allow metal objects, such as screws, staples and paper clips, to

enter the computer or keyboard. Foreign metal objects can create a

short circuit, which can cause computer damage and fire, possibly

resulting in serious injury.

■ Do not touch the connectors on the memory module or on the

computer. Debris on the connectors may cause memory access

problems.

Take care to ensure that the memory module cover is firmly closed.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 257 258

No comments

Yamaha SA500 User Manual Page 180