Yamaha SA500 User Manual download pdf (Page 166)

User’s Manual 6-12

Power and Power-up Modes

To enter a password manually, follow these steps:

1. Turn on the power as described in Chapter 3, Getting Started. The

following message will appear in the LCD:

Enter Password [xxxxxxxx]

2. Enter the Password.

3. Press Enter.

Power-up modes

The computer has three power-up modes:

■ Hibernation (saves data in memory to the hard disk)

■ Sleep (power remains on, maintaining the data in memory, but the CPU

and all other devices effectively enter a 'sleep' mode)

■ Boot (does not save data in memory)

Windows utilities

You can configure various settings associated with both Sleep Mode and

Hibernation Mode within the Power Options (to access it, click Start →

Control Panel → System and Maintenance → Power Options).

Hot keys

You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter

Hibernation Mode - please refer to Chapter 5, The Keyboard for further

details.

Panel power on/off

You can set up your computer so that power is turned off automatically

when you close the display panel, and turned on again when you open it.

Please note that this function is only available for Sleep Mode or

Hibernation Mode, not for Shut Down Mode.

The password is necessary only if the computer was shut down in boot

mode, not in Hibernation or Sleep mode.

At this point, the hotkeys Fn + F1 to F9 do not work. They will function after

you enter the password.

If you enter the password incorrectly three consecutive times, the

computer shuts down. You must turn on the computer again and re-enter

the password.

Refer also to the section Turning off the power in Chapter 3, Getting

Started.

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 257 258

No comments

Yamaha SA500 User Manual Page 166