Yamaha RX-300 Owner's Manual download pdf (Page 18)

DISPLAY PANEL

PRESET

kHz

MHz

MEMORY

AUTO

TAPE MON

STEREO

l00

PRO LOGIC

3 STEREO HALL

VOCAL AIDLIVE HOUSE

ONE TOUCH KARAOKE

SLEEP

NORMAL WIDE

PHANTOM

EFFECT OFF

12356

1 Multi-information display

Displays various information, for example station frequency,

preset station number and name of selected input source.

2 STEREO indicator

Lights up when an FM stereo broadcast with sufficient signal

strength is received.

3 Signal-level meter

Indicates the signal level of the received station.

If multipath interference is detected, the indication decreases.

4 SLEEP indicator

Lights up while the built-in SLEEP timer is functioning.

5 Center channel mode indicators

The name of a selected center channel mode lights up only

when the DSP program, PRO LOGIC or 3 STEREO is

selected.

6 EFFECT OFF indicator

Lights up if the digital sound field processor including the Dolby

Pro Logic Surround decoder is turned off by pressing the

SUR/KARAOKE EFFECT button on the front panel or the

EFFECT ON/OFF key on the remote control transmitter when

a normal DSP program ( PRO LOGIC, 3 STEREO,

LIVE HOUSE or HALL) is selected. In this state, sound output

is 2-channel stereo.

7 MEMORY indicator

When the MEMORY button is pressed, this indicator flashes

for about 5 seconds. During this period, the displayed station

can be programmed to the memory by using the A/B/C/D/E

button and the preset station number selector buttons.

8 AUTO indicator

Lights up when this unit is in the automatic tuning mode.

9 TAPE MON indicator

Lights up when the tape deck (or MD recorder etc.) is selected

as the input source by pressing the TAPE (MD) MONITOR

button.

0 DSP program indicators

When a normal DSP program ( PRO LOGIC, 3

STEREO, LIVE HOUSE or HALL) is selected, its name lights

up.

A ONE TOUCH KARAOKE indicator

Lights up by pressing the ONE TOUCH KARAOKE button on

the front panel. In this mode, you can select one of three audio

output modes according as you prefer. If you select the

“VOCAL CUT” mode, medium frequencies (vocals, etc.) of the

playing source sound are attenuated.

To extinguish this indicator, press the ONE TOUCH

KARAOKE button once or more.

B VOCAL AID indicator

Lights up by pressing the VOCAL AID button on the front

panel. In this mode, you can select one of three audio output

modes according as you prefer. If you select the “VOCAL

CUT” mode, medium frequencies (vocals, etc.) of the playing

source sound are attenuated only when there is an input from

the microphone(s).

To extinguish this indicator, press the VOCAL AID button once

or more.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Comments to this Manuals

No comments

Yamaha RX-300 Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for Karaoke systems Yamaha RX-300