Yamaha RX-300 Owner's Manual download pdf (Page 33)

English

Adjusting key of the tune currently playing

Recording your vocal mixed with the source onto a tape (adding effects

of a selected DSP program for Karaoke and other Karaoke functions)

Pressing the KEY CONTROL button changes key of the tune

currently playing. The current key level is shown on the display.

Whenever a tune changes, its original key level is restored.

Control range: –6 to –1, 0, +1 to +6

To operate on the front panel:

(Left side) : Whenever this side is pressed, key of the

tune becomes lower in 6 steps.

(Right side) : Whenever this side is pressed, key of the

tune becomes higher in 6 steps.

To operate on the remote control transmitter:

1 Press once or more so that “KEY” appears on the display.

2 By continuously pressing the “+” or “–” side of the

TIME/KEY button, the value changes continuously.

Notes

The key level you have adjusted is automatically reset to “0” by

the following operations.

●

Changing the selected input source to another by pressing

an input selector button.

●

Turning the power to this unit off by pressing the POWER

switch.

KEY CONTROL

TIME

/KEY

–+

DELAY

/KEY

Adjustable

Only when a DSP program for Karaoke (BALLAD, POPS,

JAZZ or ROCK) is selected or the DSP is turned off (so that

“E. OFF” appears on the display), you can record your vocal

input from the microphone(s) connected to this unit along with

the source onto a tape (or MD) by using the tape deck, VCR,

etc. connected to the TAPE (MD) REC OUT and/or VCR OUT

terminals on the rear of this unit.

In addition, an effect sound of the selected DSP program for

Karaoke and effects of Karaoke functions (VOCAL AID, ONE

TOUCH KARAOKE, MIC LEVEL, ECHO and/or KEY

CONTROL) can also be recorded with the vocal and the

source.

To record:

1 Select the source to be recorded by pressing the

corresponding input selector button.

2 Prepare to sing Karaoke by using microphone(s).

3 If you want to record an effect sound of DSP program for

Karaoke together, select the corresponding program.

If you want to record effects of Karaoke functions (VOCAL

AID, ONE TOUCH KARAOKE, MIC LEVEL, ECHO and/or

KEY CONTROL) together, turn the corresponding

functions on or make adjustments on them.

4 Confirm that “TAPE MON” is not illuminated on the display.

If “TAPE MON” is illuminated, extinguish it by pressing the

TAPE (MD) MONITOR button on the front panel.

If “TAPE MON” is illuminated, your vocal, effect sound of

the selected DSP program for Karaoke and effects of

Karaoke functions cannot be recorded.

5 Play the source and then turn the VOLUME control up to

confirm the input source.

6 Begin recording on the tape deck (or MD recorder etc.) or

VCR connected to this unit.

7 Begin singing Karaoke.

Notes

●

An effect sound of the selected DSP program output from

the main speakers can be recorded along with your vocal,

however, an effect sound output from the rear speakers

cannot be recorded.

●

If “VCR” is selected as the input source, recording cannot

be made by using the VCR etc. connected to the VCR OUT

terminals on the rear of this unit.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments

Yamaha RX-300 Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Karaoke systems Yamaha RX-300