Yamaha XLT1200 User Manual download pdf (Page 4)

Engine Removal / Installation

Yamaha 1200 pv

v 1.0 © 2001 Short Block Technologies

4

4.5 (Below) Remove the 12mm bolt

securing the ground cable to the block.

Use an 10mm socket to remove the positive

cable from the starter.

4.1 (Below) Remove the four 14mm motor

mount bolts and remove the engine from

the hull.

Step 5

Accessory Removal

With the engine on the ground, workbench

or some other solid surface, begin removing

the external accessories that will NOT be

shipped with the core.

5.1 (Below) Using a 14mm socket remove

the exhaust bracket from the head.

5.2 (Below) Using a 12mm and 14mm

socket remove the rear exhaust bracket.

5.3 (Below) Stuff a rag into an open

exhaust port. This will prevent the engine

from turning over while removing the

flywheel and PTO coupler. Use a chain

wrench to remove the PTO flywheel.

5.4 (Below) Gently pull out the PTO

shroud mounting stubs.

1 2 3 4 5 6 7 8 9 10

Yamaha 1200 pv 1
Engine Installation 7

Comments to this Manuals

No comments