Yamaha DVD-S700 Manual download pdf (Page 37)

ENGLISH

Initial settings

Selecting digital output )

Select the digital output to be output from the optical/coaxial

digital audio output connector of the unit.

At the initial settings screen

Press )/* to select “7 Digital Audio Out-

put” and press

SELECT.

Press )/* to select the preferred item

(1–3) and press SELECT.

When “1 LPCM (DVD)” is selected

Off:

Only linear PCM of 48 kHz/16 bit is output from the digi-

tal audio output connector. During playback of the DVD

recorded in the linear PCM of 48 kHz/20 bit/24 bit or

96 kHz, no digital audio is output. (Factory preset)

PCM: During playback of the DVD recorded in the linear PCM

of 48 kHz/20 bit/24 bit or 96 kHz, digital audio converted

to 48 kHz/16 bit is output.

(Digital output of PCM audio is restricted to 48 kHz/

16 bit or below for copyright protection.)

When “2 Dolby Digital” is selected

Bitstream:

Dolby Digital (AC-3) bitstream (2ch–5.1ch) is out-

put. (Factory preset)

PCM: PCM (2ch) of 48 kHz/16 bit is output.

When “3 dts” is selected

Off:

No output (Factory preset)

Bitstream: dts bitstream is output.

Press )/* to select the preferred value at

each screen and press SELECT.

The screen illustrated in step 1 is displayed. Press )/* to

select “0” and press SELECT to return to the initial settings

screen.

For your reference:

ÁMake settings as shown in table * depending on the kind of amplifi-

er that is connected to the optical/coaxial digital audio output con-

nector.

Audio output from the unit’s audio output connectors is converted to

48 kHz/16 bit in addition to audio from the digital audio output con-

nector.

To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, con-

nect the amplifier or decoder directly to the audio output connec-

tors, not to the digital audio output connector. [Select “Off” at the

“1 LPCM (DVD)”.]

When connecting an amplifier (with an optical/coaxial digital input

connector) which does not contain the Dolby Digital (AC-3) or dts

decoder, be sure to select “PCM” or “Off”. If “Bitstream” is selected,

any attempt to play DVDs may cause such a high level of noise that

it may be harmful to your ears and damage your speakers.

Also refer to “Common procedures of initial settings” on

page 62.

Digital Audio Output

LPCM (DVD)

Dolby Digital

0 Exit

Off

Bitstream

dts

Off

POWER

STOP

TITLE

SUBTITLE

MARKER

ANGLEAUDIO

ON SCREEN RETURN

SELECT

SKIP

I F

PLAY

STILL/PAUSE

OPEN/CLOSE

*/ I

PLAY MODE

SLOW/

SELECT

Dolby

Digital

Bitstream

PCM

Bitstream

Type of amplifier to be

connected

No amplifier is connected

AV amplifier (with digital

audio input connector)

without Dolby Digital/dts

decoder

AV amplifier including Dolby

Digital decoder

AV amplifier including Dolby

Digital/dts decoder

Recommendable setting

LPCM

(DVD)

Off

PCM

dts

Off

Bitstream

dts

Non

Bitstream

Dolby

Digital

Bitstream

PCM

Bitstream

Type d’amplificateur à

raccorder

Aucun amplificateur

raccordé

Amplificateur AV (avec

connecteur d’entrée audio

numérique) sans décodeur

Dolby Digital/dts

Amplificateur AV équipé d’un

décodeur Dolby Digital

Amplificateur AV équipé d’un

décodeur Dolby Digital/dts

Réglage recommandé

LPCM

(DVD)

Non

PCM

dts

Bitstream

Dolby

Digital

Bitstream

PCM

Bitstream

Tipo de amplificador que

va a ser conectado

No está conectado un

amplificador

Amplificador AV (con

conectore de entrada de

audio digital) sin

descodificador Dolby Digital/

dts

Amplificador AV incluyendo

descodificador Dolby Digital

Amplificador AV incluyendo

descodificador Dolby Digital/

dts

Ajuste recomendado

LPCM

(DVD)

PCM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Comments to this Manuals

No comments

Yamaha DVD-S700 Manual Page 37

Comments to this Manuals

Related products and manuals for DVD players Yamaha DVD-S700