Yamaha DVD-S700 Manual download pdf (Page 10)

ENGLISH

PCM/U DIGITAL

MPEG

COAXIAL

DIGITAL

OPTICAL

AUDIO OUT VIDEO OUT

SUBWOOFER

CENTER SURROUND

6CH DISCRETE

MIXED 2CH

VIDEO

MAIN

S VIDEO

R R

Connection

Notes when connecting the optical digital audio cable

ÁRemove the dust protection cap from the connector and connect the

cable firmly so that the configurations of both the cable and the con-

nector match.

ÁKeep the dust protection cap and to protect against dust, always re-

attach the cap when not using the connector.

Concerning the audio output from the unit’s optical/coax-

ial digital audio output connector

The type of audio output from the connector can be selected by the

initial settings. (See page 76.)

Sound having 96 kHz sampling is converted into 48 kHz sampling

when it is output from the unit’s optical/coaxial digital audio output

connector.

For your reference:

ÁDolby Digital (AC-3) is a digital sound compression technique devel-

oped by the Dolby Laboratories Licensing Corporation.

Supporting 5.1-channel surround sound, as well as stereo (2-chan-

nel) sound, this technique enables a large quantity of sound data to

be efficiently recorded on a disc.

ÁLinear PCM is a signal recording format used in CDs. While CDs

are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit

up to 96 kHz/24 bit.

ÁIf you have a Dolby Pro Logic Surround decoder, you will obtain the

full benefit of Pro Logic from the same DVD movies that provide full

5.1-channel Dolby Digital soundtracks, as well as from titles with the

Dolby Surround mark.

Disc

DVD

Video

Sound

recording

format

Dolby Digital

(AC-3)

Linear PCM

(48/96 kHz

16/20/24 bit)

dts

MPEG 1

Linear PCM

Optical/coaxial digital audio

output from connector

Dolby Digital bitstream

(2–5.1ch) or PCM (2ch)

(48 kHz/16 bit)

Linear PCM (2ch)

(48 kHz sampling/16 bit only)

or no output

Bitstream or no output

PCM

(44.1 kHz sampling)

Linear PCM

(44.1 kHz sampling)

Dust protection cap

Capuchon anti-poussière

Toda de protección contra el polvo

Manufactured under license from Dolby Labo-

ratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

Unpublished Works. j 1992–1997 Dolby Labora-

Fabricado bajo licencia de los Laboratorios Dolby.

“Dolby” y el símbolo de doble D son marcas regis-

tradas de los Laboratorios Dolby. Trabajos Con-

fidenciales No Publicados. h 1992–1997 Dolby

Laboratories, Inc. Todos los derechos están reser-

vados.

Fabriqué sous licence de Dolby Laboratories. “Dol-

by” et le symbole double-D sont des marques com-

merciales de Dolby Laboratories. Projet non publié

confidentiel. j 1992–1997 Dolby Laboratories,

Caution for the optical/coaxial digital audio output

connector:

È When connecting an amplifier (with an optical/

coaxial digital input connector) which contains

the Dolby Digital (AC-3) or dts decorder

ÁBe sure to select “Bitstream” both at “2 Dolby Digi-

tal” and “3 dts” of the initial setting “7 Digital Audio

Output”. (See page 76.)

È When connecting an amplifier (with an optical/

coaxial digital input connector) which does not

contain the Dolby Digital (AC-3) or dts decoder

ÁBe sure to select “PCM” at “2 Dolby Digital” and

“Off” at “3 dts” of the initial setting “7 Digital Audio

Output”. (See page 76.)

ÁOtherwise any attempt to play DVDs may cause

such a high level of noise that it may be harmful to

your ears and damage your speakers.

ÁVideo CDs and CDs can be played as they would

normally be played.

Note:

ÁSome dts decoders which do not support DVD-dts interface may not

work properly with the DVD/VIDEO CD/CD player.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Comments to this Manuals

No comments

Yamaha DVD-S700 Manual Page 10

Comments to this Manuals

Related products and manuals for DVD players Yamaha DVD-S700