Yamaha disklavier tv User's Guide download pdf (Page 44)

104

English

Continue to next page...

CHAPTER

Troubleshooting

If you are having difficulty operating your Disklavier, see

if any of the symptoms listed below apply to your

problem and follow the recommended remedy.

The Disklavier does not turned on.

• Make sure that the Power Supply unit is securely

connected to an AC wall outlet with the supplied power

cord. (→ pg. 14)

• Make sure that the Mains switches on both the Power

Supply unit and the I/O Center are turned on.

• When the does not light green and stays

flashing green several minutes after the I/O Center is

turned on, turn the Power Supply unit off, wait

approximately 10 seconds or more, and then turn the

unit back on. (→ pg. 4 “Turning the Disklavier On” in

“Quick Guide”)

No sound is heard from the supplied

Monitor speakers.

• Make sure the Monitor speakers’ AC power cables are

connected to the SWITCHED AC outlets on the Power

Supply unit.

• Make sure that the POWER switches on both Monitor

speakers are turned on.

• Make sure the Monitor speakers are connected to the

OUTPUT jacks on the I/O Center with the supplied

speaker cords. (→ pg. 13)

• Make sure that the overall volume is adequately turned

up on the Pocket Controller. (→ pg. 12 “Adjusting the

Overall Volume” in “Quick Guide”)

• Make sure that the volume adjusted in [Balance] screen

is adequately turned up on the Pocket Controller. (→

pg. 27 “Adjusting the Volume Balance among the

Keyboard Playing, Ensemble Sound, Software

Playback, and Microphone’s Input”)

• In Quiet mode, no sound is heard other than the solo

piano sound during playback of a PianoSoft Solo song.

• The Monitor speakers are not supplied with the

Disklavier PRO Series. In such a case, prepare active

speakers equivalent to the Monitor speakers supplied

with the Mark IV Series. (→ pg. 117 “Specifications”)

The Disklavier cannot be controlled on the

Pocket Controller.

• The Pocket Controller is beyond the maximum

operating range (approx. 20 m (65.6 ft.)). In such a

case, move closer to the Disklavier.

• Make sure that the CF wireless LAN card is securely

inserted into the Pocket Controller’s CF card slot.

When you reinsert the card, be sure to reboot the

Pocket Controller. (→ pg. 17)

The Disklavier does not read a song file.

• The maximum number of the readable files in an album

(folder) is 999.

• Make sure that the name of the SMF song has an

extension as “.MID”/“.mid” and the E-SEQ song has

“.FIL”/“.fil”.

The playback order differs from the order

on another device.

• The playback order depends on the recording software

or other factors. Naming the file starting from numbers

such as 01, 02, etc. may solve the problem.

AdvancedManual.book Page 104 Monday, February 1, 2010 4:48 PM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 74 75

Comments to this Manuals

No comments

Yamaha disklavier tv User's Guide Page 44

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Yamaha disklavier tv