Yamaha disklavier tv User's Guide download pdf (Page 34)

CHAPTER 7: Enhancing the Disklavier Features by Hooking Up a MIDI Device

English

The Disklavier can play back the MIDI data being

received from the connected MIDI device as well as the

software loaded or stored in the Disklavier itself. The

following options should be set up in advance.

[Port]

Selects the terminal/port used for the data reception.

[MIDI]: Select this when the MIDI device is

connected to MIDI IN terminal.

[USB]: Select this when the MIDI device is

connected to USB port on the front of the

I/O Center.

[Piano Rcv Ch]

The MIDI data consists of multi channels that are

respectively assigned to a certain instrument’s part. This

option assigns the desired channel(s) to the piano part(s)

that is (are) played back on the Disklavier’s keyboard.

[##]: Select this when you assign no channel to

the piano part.

[01] thru [16]:

Select the desired channel to which you

assign the piano part.

[HP]: Select this when you assign the “01” and

“02” channels to the piano parts, and the

“03” channel to the pedal part.

[1+2]: Select this when the “01” and “02”

channels are assigned to the piano parts.

[Prg]: Selects the smallest number channel

assigned to the piano group voice (→ pg.

83) to be played on the Disklavier.

[Prg(All)]: Selects all channels assigned to the piano

group voice (→ pg. 83) to be played on the

Disklavier.

[Delay]

When the Disklavier receives two kinds of data (strong

and weak note) at the same time, the weak note sounds a

little bit later than the strong one due to the characteristics

of the Disklavier’s mechanism. To eliminate this delay in

the sound reproduction and the notes are sounded in

accurate timing at 500 millisecond after the data

reception, usually a delay is applied to the incoming

MIDI data.

[ON]: Select this when you apply this delay to the

incoming MIDI data.

[OFF]: Select this when you do not apply this

delay.

Setting Up the Disklavier for

MIDI Data Reception (MIDI

IN)

Tap on in the [Main] screen,

and then on .

Tap on [Port]/[Piano Rcv Ch]/[Delay],

and then press to select the

desired option.

Tap on to complete the setup.

The MIDI screen

consists of three

screens. Tap on

or to

switch the screen.

AdvancedManual.book Page 94 Monday, February 1, 2010 4:48 PM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 74 75

Comments to this Manuals

No comments

Yamaha disklavier tv User's Guide Page 34

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Yamaha disklavier tv