Yamaha Tyros4 Owner's Manual download pdf (Page 27)

Tyros4 Reference Manual 27

Voices – Playing the Keyboard –

7 Repeat steps 4–6 to edit each key.

8 Press the [8 ] (VOICE SET) button and edit the Voice Set

parameters (page 12).

After you finish editing the Voice Set parameters, press the [EXIT] button to show

the Drum Mapping display again.

9 Store the created Drum Voice.

Press the [J] (STORE) button to call up the Custom Voice display, then press the

[6 ] (STORE) button to store the Voice.

10 Press the [EXIT] button.

If you want, you can continue adding waves. Repeat steps 3–8.

(If necessary) You can re-edit the entire Voice. For details, refer to the section “Re-

Editing a Custom Voice” below.

Re-Editing a Custom Voice

1 Turn the PART SELECT [RIGHT 1] button to on, then press the

[EXPANSION] button.

2 Use the [A]–[J] buttons to select a Custom Voice to be re-

edited.

When you are selecting a Custom Drum Voice, press the [8 ] (UP) button and

select the “CustomDrum” category.

3 Press the [VOICE CREATOR] button to call up the Voice Creator

Menu.

4 Press the [G] (CUSTOM VOICE ASSEMBLY) button to call up the

operation display.

The subsequent steps are the same as for creating the Custom Voice (Normal

Voice: page 20, Drum Voice: page 24).

When you start creating a Drum Voice

from Kit Edit of the Mixing Console

function, the Voice Set button is not

shown.

NOTE

The created Voice will be lost if

you change to another Voice or

you turn the power off without

executing the Store operation.

Make sure to execute the Store

operation.

Do not use any special characters

(umlaut, accent, etc.) in the Voice name.

NOTICE

NOTE

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 140 141

No comments

Yamaha Tyros4 Owner's Manual Page 27