Yamaha CVP-202 Owner's Manual Page 147

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 146
147
CVP-202
Send Channel (Keyboard).........................................................................
MIDI
FUNCTION [MIDI 1] Display — page 9
SEND CH
Settings: OFF, 1 — 16
Basic setting: See table at left.
In any MIDI control setup, the MIDI channels (1 through 16) of the
transmitting and receiving equipment must be matched for proper data
transfer. The SEND CH function lets you set the MIDI transmit channels
for the keyboard parts.
Part Explanation Basic Setting
LEFT Left voice in Split mode (see page 36) 3
RIGHT1 Main voice 1
RIGHT2 Second voice in Dual mode (see page 33) 2
You can set each keyboard part to transmit on a separate channel. If
you set a part to OFF, the MIDI data for that part will not be transmitted.
MIDI Reception
The Clavinova always receives MIDI data in the “Multi Timbre” mode. This is a mode in which the
Clavinova voices can be independently controlled on different MIDI channel numbers (1 through 16) by an
external MIDI device. This means that you can produce the sound of a full band or ensemble on the
Clavinova by using a computer or MIDI sequencer.
Local Control ..........................................................................................................
LOCAL
Settings: ON, OFF
Basic setting: ON
The term “local control” refers to the control of the internal tone gen-
erator by the keyboard. You will normally play the Clavinova with the
Local Control function set to ON.
Turning off the local control separates the keyboard from the tone
generator, so that the Clavinova will not output any sound when you play
the keyboard. Since keyboard performance data is still output via the
MIDI jacks, however, you can use this setting when you want to play an
external MIDI tone generator from the Clavinovas keyboard without
sounding the internal voices.
To turn the local control on or off, press the LOCAL button. The data
dial and [–] and [+] buttons cannot be used.
145
Page view 146
1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 177 178

Comments to this Manuals

No comments