Yamaha CVP-202 Owner's Manual download pdf (Page 11)

CVP-202

Z Connect the power cord.

Insert the plugs at the ends of the cord, one into the AC INLET on the

bottom panel of the Clavinova, and the other into a standard AC outlet.

In some areas, a plug adapter may be provided to match the pin con-

figuration of the AC wall outlets in your area.

X Press the [POWER] switch.

The main display appears in the LCD display. (Initially, the voice

GrandPiano 1 and the accompaniment style 60’sGtrPop are

selected.) The power lamp below the lower left end of the keyboard

also lights.

C Adjust the LCD.

If the LCD is difficult to read, adjust the contrast with the [CON-

TRAST] knob at the left of the LCD.

V Adjust the volume.

Use the [MASTER VOLUME] slider to adjust the volume to an ap-

propriate level.

● When you’re ready to turn off the power, press the [POWER] switch

again. Both the LCD display and the power lamp below the left end

of the keyboard will turn off.

Connect a set of stereo headphones (optional) to the [PHONES] jack.

When headphones are connected, the internal speaker system is auto-

matically shut off. Since the Clavinova has two PHONES jacks, two sets

of headphones can be used simultaneously, allowing two people to enjoy

listening to the performance.

■ Using the Headphone Hanger: ............................................................

A headphone hanger is included in the CVP-202 package so that you

can hang the headphones on the Clavinova. Install the headphone hanger

using the included two screws (4 x 10mm) as shown in the figure.

CAUTION

• Do not hang anything other than the headphones on the hanger. Otherwise,

the Clavinova or the hanger may be damaged.

Standard stereo

phone jacks

Your Clavinova is equipped with a variety of jacks and terminals that

let you connect it to other audio and MIDI equipment. These connectors

are located at the left end of the unit on the rear panel.

You can connect other instruments that you want to play through the

Clavinova’s speakers to the AUX IN jacks, or output the Clavinova’s

sound to external speakers using the AUX OUT jacks. Use the MIDI

terminals if you want the Clavinova to control — or be controlled by —

another MIDI instrument. There’s even a TO HOST terminal that lets

you connect the Clavinova directly to a personal computer.

Be sure to turn the power off when connecting or disconnecting other

equipment. See the instructions in Chapter 9 of this manual for details.

Turning the Power On and Off

Headphones

Other Connections

PHONES

THRU

OUT

MIDI

HOST SELECT

MIDI

Mac

TO HOSTPEDAL

AUX I N

AUX O UT

L/L

RL/L

Setting Up the Clavinova

MASTER

VOLUME

ACMP

SONG

VOLUME

MAX

MIN

MAX

MIN

VOLUME

POWER

CONTRAST

PHONES

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 177 178

Comments to this Manuals

No comments

Yamaha CVP-202 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha CVP-202