Yamaha WXAD-10 Owner's Manual download pdf (Page 6)

Setup

4 Connect to the network.

Download and install the MusicCast CONTROLLER app to your mobile

device from the App Store or Google Play. Once you start the app, follow the

instructions in the app to complete the settings.

Note

• For a LAN cable connection, connect a commercially-available STP (shielded

twisted pair) network cable (straight, CAT-5 or higher) to the [NETWORK] terminal on

the rear panel.

• If your router supports multiple SSIDs (network names), connect the mobile device

to the primary SSID network (Primary SSID, 1st SSID, etc.).

• For more information about Internet connections, please refer to the instruction

manual supplied with your network device.

• The unit may not be able to access your personal computer or Internet radio station

due to security software or network device settings (such as a firewall). In this case,

change the settings on the security software or the network device.

Auto standby

This unit automatically engages standby mode if you do not operate it for 20

minutes while the playback is stopped. You can change this setting using

MusicCast CONTROLLER. On the room selecting screen, tap [ (Settings)]

and change the setting.

2 3

Hold down the [CONNECT]

button for five seconds.

Setup

[Bottom panel]

WXAD-10

[Front panel]

Indicator

When the Power indicator

turns from flashing to lit,

proceed to the next operation.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Yamaha WXAD-10 Owner's Manual Page 6