Yamaha ATS-1050 Manual download pdf (Page 20)

18

En

Bluetooth

The power of the

sound bar and of

the TV switch in

the opposite

direction. (For

example, the TV

is turned off if

the sound bar is

turned on.)

(when TV’s

remote control

learning function

is used)

The power of the TV was on when

you performed the learning

operation.

Press the power key on the TV and

(power) on the rear panel of the sound

bar to turn them on and then press the

power key on the TV’s remote control

to turn them off.

Problem Cause Remedy

Cannot make the

sound bar pair

with the

Bluetooth

device.

Bluetooth is not selected as the

input source.

Select Bluetooth as the input source.

The device does not support

A2DP.

Perform pairing operations with a

device which supports A2DP.

A Bluetooth adaptor, etc., that you

want to pair with the sound bar

has a password other than

“0000.”

Use a Blu etooth adaptor, etc., whose

password is “0000.”

The sound bar and device are too

far apart.

Move the device closer to the sound

bar.

There is a device (microwave

oven, wireless LAN, etc.) that

outputs signals in the 2.4 GHz

frequency band nearby.

Move the sound bar away from the

device that is emitting radio frequency

signals.

If the Bluetooth device is equipped

with the wireless LAN function, turn off

the wireless LAN function, and turn on

the Bluetooth function only.

Another Bluetooth device is

connected.

Terminate current Bluetooth

connection, and perform pairing with

the new device.

Cannot make a

Bluetooth

connection.

Another Bluetooth device is

connected.

The sound bar cannot make multiple

Bluetooth connections. Terminate

current Bluetooth connection, and

make connection for the desired

device.

More than nine devices are paired

and the oldest pairing information

is deleted.

Perform pairing again. The sound bar

can retain pairing information for up to

eight devices. When pairing a ninth

device, pairing data for the device with

the oldest connection date will be

deleted.

Cannot make a

Bluetooth

connection (the

BLUETOOTH

indicator

continues to

flash rapidly).

There is a problem within the

sound bar.

Unplug the power cable from the AC

wall outlet and contact the nearest

authorized Yamaha dealer or service

center.

No sound is

produced or the

sound is

interrupted

during playback.

The Bluetooth connection of the

sound bar with the device is

disconnected.

Perform Bluetooth connection

operations again (p.10).

Bluetooth is not selected as the

input source.

Select Bluetooth as the input source.

The sound bar and device are too

far apart.

Move the device closer to the sound

bar.

There is a device (microwave

oven, wireless LAN, etc.) that

outputs signals in the 2.4 GHz

frequency band nearby.

Move the sound bar away from the

device that is emitting radio frequency

signals.

If the Bluetooth device is equipped

with the wireless LAN function, turn off

the wireless LAN function, and turn on

the Bluetooth function only.

The device is not set to send

Bluetooth audio signals to the

sound bar.

Change the audio output setting and

connection setting on the device.

Playback on the device has not

been performed.

Perform playback on the device.

The device’s volume is set to

minimum.

Turn up the device’s volume level.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 146 147

Comments to this Manuals

No comments