Yamaha ATS-1050 Manual download pdf (Page 13)

Playing back audio from a Bluetooth device on the

sound bar

1 With the sound bar turned on, press the BLUETOOTH key on the

sound bar’s remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the top panel flashes.

2 Turn on the Bluetooth function of the device and then connect.

When Bluetooth connection is made correctly, the BLUETOOTH indicator of the

sound bar lights up.

3 Play back a song on the device.

NOTE

• Perform Bluetooth connection with the device and sound bar within 10 meters (33 ft) of each other.

• It may be necessary to select “ATS-1050 Yamaha” in the Bluetooth device list again, in the event that a

connection problem occurs. You may have to change the output setting to output audio to the sound bar,

depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the sound bar, terminate that Bluetooth connection, then

connect with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the Bluetooth connection

is terminated with the sound bar turned on, the BLUETOOTH indicator changes from the lit

status to the flashing status and the sound bar enters the connection wait status.

• The Bluetooth function is turned off on the compatible device.

• The BLUETOOTH key on the sound bar’s remote control is pressed for more

than 3 seconds.

• The sound bar is turned off.

Using the Bluetooth standby mode

The Bluetooth standby mode allows you to turn on (or off) the sound bar automatically,

linked with the operation of the Bluetooth device.

1 With the sound bar turned on, hold down the BLUETOOTH STANDBY

key on the sound bar’s remote control for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the

mode between enabled and disabled.

When the Bluetooth standby mode is enabled and the sound bar is turned off, the

D indicator lights up in red (Bluetooth standby).

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and

conveniently with the Bluetooth device. (Setting items: basic operation, surround mode,

sound adjustments)

NOTE

• To use the application, connect the sound bar and a Bluetooth device via Bluetooth connection.

• If you enable the Bluetooth standby mode of the sound bar, you can turn on the power of the sound bar

with the Bluetooth device.

For details on “HOME THEATER CONTROLLER”, see the product information on our

website.

Flashes

Lights up

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the sound bar is turned off)

When Bluetooth connection is made on the device, the sound bar will turn on and will be ready to play

back sound from the device.

Power off interlock function (when the sound bar is turned on)

The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only

when BLUETOOTH is selected as the input source.)

BLUETOOTH

STANDBY

Flash 3 times (enabled), flash once (disabled)

Lights up (red)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 146 147

Comments to this Manuals

No comments

Yamaha ATS-1050 Manual Page 13

Comments to this Manuals

Related products and manuals for Bluetooth music receivers Yamaha ATS-1050