Yamaha MCR-940 Owner's Manual download pdf (Page 36)

SETTING THE TIMER

34 En

OTHER OPERATIONS

The receiver is equipped with 2 types of timer functions. The BD player also turns on or sets to standby mode

automatically by the system control connection (☞p.8).

The clock timer automatically turns the receiver on or sets

it to standby mode at the specified time. You can also

specify an input which the receiver automatically selects

when the clock timer turns it on.

Notes

• You cannot set the clock timer unless you adjust the clock

(☞p.12).

• If you do not touch any key for more than 30 seconds after the

previous key operation, the operations you made are cleared

from the memory and the normal display reappears.

1 Press TIMER and / to select “TIMER”, and

then press ENTER.

The receiver enters timer setting mode. The TIMER

indicator flashes on the front panel display.

2 Press or to select “ON” (timer enabled)

or “OFF” (timer disabled), and press ENTER.

ON: The timer clock setting screen appears. Proceed

to step 3.

OFF: The TIMER indicator turns off and the receiver

returns to normal mode.

Note

To disable the timer, select “OFF”. Once the timer is enabled, the

timer setting and the TIMER indicator remain on until “OFF” is

selected.

3 Set the starting time of the timer.

For details on how to set the clock, see steps 4

through 6 of “Adjusting the Clock” (☞p.12).

4 Press / or an input selection key to select

the input source to be used when the timer

turns on the receiver, and press ENTER.

The receiver automatically selects the input source

when it is turned on by the clock timer.

If FM is selected as the input source, the preset

number (e.g. “P01”) is shown on the front panel

display. Press / to select the preset number of the

station you want to hear when the timer is activated,

and press ENTER.

If you select “---” (default), the receiver selects the

station that you previously tuned in to.

If no station is registered as a preset station, “---” is

shown. Press ENTER and proceed to step 5.

You can only select a preset station. Register a station

that you want to hear when the timer is activated as a

preset station in advance (☞p.31).

Note

You cannot select AUX as an input source.

5 Press / to set the operation time length of

the receiver.

You can select a length of time from 30 to 90 minutes

in 10-minute steps. Select “--” if you do not want the

receiver to automatically go to standby mode.

6 Press ENTER to complete the timer setting.

The TIMER indicator lights up.

7 Press to set the receiver to standby mode.

The receiver will be turned on automatically at the

specified time.

SETTING THE TIMER

Setting the clock timer

INPUT

BASS

PHONES

VOLUME

MIN MAX

TREBLE BALANCE

PRESET PURE DIRECT

TIMER

TIMER indicator

INPUT

A B C D

EXIT

TOP MENU/TITLE LIST

POP UP MENU

TIMER

Input selection

keys

ENTER

RETURN

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Comments to this Manuals

No comments

Yamaha MCR-940 Owner's Manual Page 36

Comments to this Manuals

Related products and manuals for Blu-Ray players Yamaha MCR-940