Yamaha YHT-494 Owner's Manual download pdf (Page 60)

En 60

SETUP

Setting sound field program parameters

CINEMA DSP parameters

Selects a surround decoder to be used with a sound field program

in the MOVIE category. J1

Change the effect level (level of the sound field effect to be added).

You can adjust the level of the sound field effect while checking the

sound effect.

Parameters usable in certain sound field

programs

2ch Stereo only

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

sound source is played back. You can enjoy a higher quality sound.

7ch Stereo only

Adjusts the center channel volume. J2

Adjusts the volume of the surround L channel. J2

Adjusts the volume of the surround R channel. J2

Adjusts the volume of the surround back channel. J2

Straight Enhancer/7ch Enhancer only

Adjusts the effect level of the compressed music enhancer mode.

<Neo:6 Cinema>

Dolby PLIIx Movie

(Dolby PLII Movie)

Selects the Dolby Pro Logic IIx Movie (or

Dolby Pro Logic II Movie) decoder.

Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.

DSP Level

Adjustable range -6 dB to 0 dB to +3 dB

Default setting 0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound field

programs.

→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→ Reduce the effect level.

Direct

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0dB.

Off Does not bypass the DSP circuit and tone control

circuit.

CT Level

Adjustable range 0 to 100%

Default setting 100%

SL Level

Adjustable range 0 to 100%

Default setting 100%

SR Level

Adjustable range 0 to 100%

Default setting 100%

SB Level

Adjustable range 0 to 100%

Default setting 35% (7.1-channel configuration)

50% (6.1-channel configuration)

EFCT LVL

High (Default) Standard effect.

Low Sets when the high-frequency signals of the source are

emphasized excessively.

1 : Surround decoders cannot be changed when used with the following MOVIE

sound field programs.

• Mono Movie

• Sports

• Action Game

• Roleplaying Game

2 : Not displayed when speakers are set to be inactive.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 90 91

Comments to this Manuals

No comments

Yamaha YHT-494 Owner's Manual Page 60

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YHT-494