Yamaha RX-Z7 Owner's Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
57 En
FM/AM tuning
BASIC
OPERATION
Use this feature to store up to 40 stations FM/AM stations
(A1 to E8: 8 preset station numbers in each of the 5 preset
station groups). Preset the desired stations to this unit by
using the automatic or manual station preset.
Automatic station preset
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals in order.
(U.S.A. model only)
You can use the automatic preset tuning feature to store up
to 40 AM HD Radio, FM HD Radio, and analog FM radio
stations with strong signals.
(U.S.A. model only)
1 Press IBAND (or 8BAND) to select the
desired reception band.
This unit searches the stations in the selected band
and then another band.
2 Press and hold IBAND (or 8BAND) for
more than 3 seconds.
The MEMORY indicator flashes and “AUTO
MEMORY” appears in the front panel display. After
approximately 5 seconds, automatic presetting starts
from the current frequency and proceeds toward
higher frequencies.
When automatic preset tuning is completed, the
MEMORY indicator disappears.
y
To specify the preset group and number from which this unit
stores stations, press EPRESET/TUNING/CH l / h (or
9CAT./A-E l / h and 9PRESET/CH k / n) repeatedly
after you perform step 2.
To cancel the automatic station preset, press IBAND (or
8BAND) again.
Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations.
(U.S.A. model only)
When this unit stores the FM HD Radio stations with this
feature, this unit stores only the main audio program of the
stations (HD1). When you want to store the sub-audio programs
of the FM HD Radio stations, preset the stations manually.
Manual station preset
Use this feature to store the FM or AM stations manually.
(U.S.A. model only)
You can store the analog FM/AM radio stations and FM/
AM HD Radio stations manually, and you can also store
the sub-audio programs of FM HD Radio station.
1 Tune into a station.
See page 56 for tuning instructions.
y
(U.S.A. model only)
To store a sub-audio program of the HD Radio station (HD2
to HD8), press APRG SELECT b / a repeatedly to
select the desired audio program (page 59).
2 Press FMEMORY (or 0MEMORY).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
To store the selected station under an empty preset number
automatically, press and hold FMEMORY (or
0MEMORY) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
To cancel the manual station preset, press FMEMORY
(or 0MEMORY) again.
3 To select the preset group and number (A1 to
E8), press EPRESET/TUNING/CH l / h
(or 9CAT./A-E l / h and 9PRESET/CH k /
n) repeatedly.
To select a higher preset station group and number,
press Eh (or 9k).
To select a lower preset station group and number,
press El (or 9n).
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE and then
press 3TUNER.
Preset FM/AM stations
Notes
MEMORY
A1 FM 88.9MHz
AUTO MEMORY
Flashes
Flashes
PRESET
MEMORY A1
FM 88.9MHz
Lights up
PRESET
MEMORY C2
FM 88.9MHz
Preset station group and number
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 177 178

Comments to this Manuals

No comments