Yamaha RX-Z7 Owner's Manual download pdf (Page 104)

104 En

Graphical user interface (GUI) menu

When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”,

you cannot select the following parameters:

– Zone2 Max Vol./Zone3 Max Vol.

– Zone2 Initial Vol./Zone3 Initial Vol.

Zone2 Max Vol./Zone3 Max Vol.

(Zone 2/Zone 3 Maximum volume setting)

Use this feature to set the maximum volume level in the

Zone 2 or Zone 3.

Control range: –30.0 dB to +15.0 dB, +16.5 dB

Control step: 5.0 dB

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes

priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”

setting.

Zone2 Initial Vol./Zone3 Initial Vol.

(Zone 2/Zone 3 initial volume setting)

Use this feature to set the volume level of Zone 2 or Zone

3 when the power of each zone is turned on.

Control range: Off, Mute, –80.0 dB to +16.5 dB

Control step: 0.5 dB

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes

priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”

setting.

Zone2 Balance/Zone3 Balance

(Zone 2/Zone 3 balance)

Use this feature to adjust the balance of the volume of the

left and right channels in each zone.

Choices: L10 to L1, 0, R1 to R10

Zone2 Tone Control/Zone3 Tone Control

(Zone 2/Zone 3 tone control)

Use this feature to adjust the balance of bass and treble

output to the selected zone.

Choices: Bass (Bass control), Treble (Treble control)

Control range: –10.0 dB to +10.0 dB

Initial setting: 0.0 dB

Zone2 Mono/Zone3 Mono

(Zone 2/Zone 3 monaural mode)

Use this feature to select whether you play back sources

monaurally in the selected zone.

Zone2 Muting Type/Zone3 Muting Type

(Zone 2/Zone 3 muting type)

Use this feature to adjust how much the mute function

reduces the output volume of the selected zone.

■ Zone OSD (Zone on-screen display)

Use this feature to display the operational status of Zone 2,

Zone 3, and Zone 4 on the Zone 2 video monitor

connected to the ZONE VIDEO jacks on the rear panel of

this unit.

■ Zone Rename (Zone Rename)

Main/Zone2/Zone3/Zone4

(Main/Zone 2/Zone 3/Zone 4 rename)

Use this feature to edit the name of the selected zone.

1 Press 9k / n / l / h to select a character or

function and then press 9ENTER to

confirm the selection.

Repeat step 1 until you input a name you want to use.

2 Press 9k / n / l / h to select “SAVE” and

then press 9ENTER.

• To reset the name, select “RESET” and then press

9ENTER.

• To cancel the operation without change, select

“CANCEL” and then press 9ENTER.

Note

Choice Descriptions

Off

Turns off the monaural playback mode. This

unit plays back sources in stereo.

Turns on the monaural playback mode. This unit

mixes down the left and right channel signals

and plays the sources monaurally.

Choice Functions

Full

Mutes all the audio output.

–20dB

Reduces the current volume by 20 dB.

–40dB

Reduces the current volume by 40 dB.

Choice Functions

Off

Turns off the zone on-screen display feature.

Zone2

Displays the operational status of Zone 2 only.

All

Displays the operational status of Zone 2, Zone

3 and Zone 4.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 177 178

Comments to this Manuals

No comments

Yamaha RX-Z7 Owner's Manual Page 104

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-Z7

Related products and manuals for Alarm clocks Sony ICF-C215