Yamaha RX-V800 Owner's Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
20
ON-SCREEN DISPLAY (OSD)
Full display Short display
You can display the operation information for this unit on
a video monitor. If you display the SET MENU and DSP
program parameter settings on a monitor, it is much easier
to see the available options and parameters than it is by
reading this information on the front panel display.
y
If a video source is being reproduced, the OSD is
superimposed over the image.
The OSD signal is not output to the REC OUT jack, and will
not be recorded with any video signal.
You can set the OSD to turn on (blue background) or off when
a video source is not being reproduced (or the source
component is turned off) by using 14 DISPLAY SET on the
SET MENU (see page 43).
OSD Modes
You can change the amount of information the OSD
shows.
Full display
This mode always shows the DSP program parameter
settings on the video monitor (see page 61).
Short display
This mode briefly shows the same contents as the front
panel display at the bottom of the screen and then
disappears.
Display off
This mode briefly shows the DISPLAY OFF message at
the bottom of the screen and then disappears. Afterwards,
no changes to operations appear on the monitor except
those of the ON SCREEN button.
P01 CONCERT HALL
INIT. DLY
45ms
ROOM SIZE 1.0
LIVENESS
5
P01 CONCERT HALL
y
When you choose the full display mode, INPUT l / h,
VOLUME and some other types of operation information are
displayed at the bottom of the screen in the same format as that
for the front panel display.
The SET MENU and test tone display appear regardless of the
OSD mode.
Selecting the OSD Mode
1 When you turn on the power, the video
monitor and front panel display show the
level of the main volume for a few seconds
and then switch to show the current DSP
program.
2 Press ON SCREEN on the remote control
repeatedly to change the display mode.
The OSD mode changes in the following order: full
display, short display, and display off.
Notes
If you choose a video input source that has a component
connected to both the S VIDEO IN and composite VIDEO IN
jacks, and both the S VIDEO OUT and composite VIDEO
OUT jacks are connected to a video monitor, the video signal is
output to both the S VIDEO OUT and VIDEO OUT jacks.
However, the OSD is carried only on the S-video signal. If no
video signal is input, the OSD is carried on both the S-video
and composite video signals.
If your video monitor is connected only to the COMPONENT
VIDEO jacks of this unit, the OSD is not shown. Make sure to
connect your video monitor to the COMPONENT VIDEO
jacks and either VIDEO or S VIDEO jacks if you want to see
the OSD.
Playing back video software that has an anti-copy signal or
video signals with a lot of noise may produce unstable images.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 81 82

Comments to this Manuals

No comments

Sangean RCR-4 (V1) Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Radio Sangean RCR-4 (V1).
Wir stellen 4 PDF-Handbücher Sangean RCR-4 (V1) zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Radio Sangean

Modelle Dokumententyp
RCR-7WF (R3) Bedienungsanleitung   Sangean RCR-7WF (R3) Benutzerhandbuch, 40 Seiten
RCR-7WF (R3) Bedienungsanleitung   Sangean RCR-7WF (R3) Manual del usuario, 40 Seiten
RCR-7WF (R3) Bedienungsanleitung   Sangean RCR-7WF (R3) Manuel d'utilisation [de] , 40 Seiten
SG-622 (V1) Bedienungsanleitung   Sangean SG-622 (V1) User Manual, 10 Seiten
SR-25 (V1) Bedienungsanleitung      Sangean SR-25 (V1) User Manual [de] [it] , 2 Seiten
SR-3 (V1) Bedienungsanleitung      Sangean SR-3 (V1) User Manual, 2 Seiten
U2 (V1) Bedienungsanleitung   Sangean U2 (V1) Benutzerhandbuch, 9 Seiten
U2 (V1) Bedienungsanleitung   Sangean U2 (V1) Manual del usuario, 8 Seiten
U2 (V1) Bedienungsanleitung   Sangean U2 (V1) Manuel d'utilisation, 8 Seiten
U2 (V1) Bedienungsanleitung   Sangean U2 (V1) User Manual, 8 Seiten
UCR-100 (V1) Bedienungsanleitung   Sangean UCR-100 (V1) Benutzerhandbuch, 14 Seiten
UCR-100 (V1) Bedienungsanleitung   Sangean UCR-100 (V1) Manual del usuario, 14 Seiten
UCR-100 (V1) Bedienungsanleitung   Sangean UCR-100 (V1) Manuel d'utilisation, 14 Seiten
UCR-100 (V1) Bedienungsanleitung   Sangean UCR-100 (V1) User Manual, 14 Seiten
WFR-1 (V1) Bedienungsanleitung   Sangean WFR-1 (V1) Benutzerhandbuch, 39 Seiten
WFR-1 (V1) Bedienungsanleitung   Sangean WFR-1 (V1) Manual del usuario, 39 Seiten
WFR-1 (V1) Bedienungsanleitung   Sangean WFR-1 (V1) Manuel d'utilisation, 39 Seiten
WFR-1 (V1) Bedienungsanleitung   Sangean WFR-1 (V1) User Manual, 39 Seiten
WFR-1 (R1) Bedienungsanleitung   Sangean WFR-1 (R1) Benutzerhandbuch, 41 Seiten
WFR-1 (R1) Bedienungsanleitung   Sangean WFR-1 (R1) Manuel d'utilisation, 42 Seiten